Abstract:The effects of annealing temperature on the recrystallization and grain boundary distribution characteristic for the drawn microtube of GH4169 alloy were studied by scanning electron microscope (SEM) equipped with an electron backscatter diffraction (EBSD) analysis system and transmission electron microscopy (TEM). The results demonstrated that at an annealing temperature of 850 °C, only a small proportion of recrystallization for the microtube underwent. As the annealing temperature increased, the proportion of recrystallization also increased. Specifically, at 900 °C, the proportion reached 95.8 %, indicating complete recrystallization. Fine recrystallization grains were obtained with an average grain size of 4.73 μm. As the annealing temperature is above 900 °C, the microtube also undergo complete recrystallization, and the grains grow up gradually. At 1000 °C, the average grain size grows to 7.42μm. The results also revealed that with the annealing temperature increasing, the proportion of Σ3 grain boundary of the microtube was rising. The proportion of Σ3 grain boundary increased from 30.1 % to 34.2 % with the annealing temperature increased from 900 °C to 1000 °C. Moreover, as the annealing temperature increased from 850 °C to 1000 °C, the room temperature tensile strength of the tube decreased from 1323 MPa to 965 MPa, the yield strength decreased from 1054 MPa to 523 MPa, and the fracture elongation increased from 10.2 % to 31.2 %.

Effect of high-pressure annealing on microstructural transformation of nanotubes

Microstructural changes in carbon nanotubes induced by annealing at high pressure

Study on thermal stability of nanotubes under high pressure

Macroscopic synthesis of onion-like graphitic particles

Thermal Stability of Carbon Nanotubes under 5.5Gpa

The effect of high-temperature annealing on the structure and electrical properties of well-aligned carbon nanotubes

Effect of High Pressure on Microstructure of Crystallizing Amorphous Nd9Fe85B6 Alloy

Effect of Annealing on the Purity and Microstructure of Disorder Carbon Nanotubes

Effect of High Temperature-High Pressure Treatment on Microstructure and Mechanical Properties of Cu-Cr Alloy

Pressure-Induced Transformations of Onion-Like Carbon Nanospheres Up to 48 Gpa

High Pressure Raman Study of Single-Wall Carbon Nanotubes

Effect of Annealing Temperature on microstructure and properties of the Microtubes for GH4169 alloy

Amorphization of C-60 Nanotubes under Pressure

Effect of annealing temperature on microstructure and properties of stainless steel rings after high-pressure torsion

High Pressure Study of Nitrogen Doped Carbon Nanotubes Using Raman Spectroscopy and Synchrotron X-ray Diffraction

MATERIALS SCIENCE: High-Pressure Microscopy.

Pressure-Induced Transformations in Carbon Nano-Onions

Impact of Annealing on Morphology and Thermal Stability of Bi2O3 Nanotube‐based Microarchitectures

Stability and Structure Changes of Na-Titanate Nanotubes at High Temperature and High Pressure

Microstructure Transformation of Carbon Nanofibers During Graphitization

High-Pressure Microscopy