Abstract:Ti-13 V-3Al (at%) high temperature shape memory alloy was considered attractive material due to its low density. The demand for the better shape memory performance is proposed to widen the scope of application. In the present study, Ti-13 V-3Al is processed by high-pressure torsion and annealing. The microstructure, martensitic transformation and mechanical properties were investigated. The severe plastic deformation introduced high density defects and decreased the stability of the alpha" phase. The phase constitution is the sole beta phase after high-pressure torsion, which was related to the Gibbs-Thomson effect. After the annealing treatment at 700 degrees C, numerous small parallel alpha" martensite variants were observed, which was affected by the residual defects. More nucleation sites were provided, resulting that the reverse martensitic transformation was accomplished in a narrow temperature range. Moreover, the formation of (111) type I twinning become easier due to the assistance of the (111) stacking faults. The alpha" martensite variants became larger and evolved to the V-shaped and the triangular self-accommodated morphologies as the annealing temperature increased to 800 degrees C. The twinning relationship in the different annealing temperature both were the (111) type I twinning. The properties were characterized by the tensile loadingunloading tests and microhardness tests. The shape memory effect was optimized and 4% full recoverable strain was obtained in the alloy annealed at 700 degrees C. The apparent hardness decreased from 323HV and 263HV as the annealing temperature raised from 700 degrees C to 800 degrees C. (C) 2021 Elsevier B.V. All rights reserved.

Microstructural Evolution of Metastable Austenitic Steel During High-Pressure Torsion and Subsequent Heat Treatment

In-Situ Neutron Diffraction Investigation of Austenite → Ε-Martensite → Α-Martensite Transformation and Its Dynamic Effect on Macroscopic Serration in a 13%mn Metastable Austenitic Steel

Nanostructured Ti29.7Ni50.3Hf20 High Temperature Shape Memory Alloy Processed by High-Pressure Torsion

Microstructural Behavior and Mechanical Properties of Nanocrystalline Ti-22Al-25Nb Alloy Processed by High-Pressure Torsion

Structural evolution during nanostructuring of additive manufactured 316L stainless steel by high-pressure torsion

Microstructural Evolution of High Cr Ferrite/martensite Steel after Deformation in Metastable Austenite Zone

Martensitic Transformation in AISI-316 Austenitic Steel During Thermomechanical Processing

Microstructural Evolution During Deformation of Austenite in Intercritical Region of a Nb-V-Ti Microalloyed Steel

The Role of Temperature in the Microstructural Evolution of HPT-processed NiTiHf High-Temperature Shape Memory Alloy

Microstructure and Tensile Properties of Nanocrystalline (fenicocu)1−xtixalx High Entropy Alloys Processed by High Pressure Torsion

The Microstructure and Martensitic Transformation of Ti-13V-3Al Light Weight Shape Memory Alloy Deformed by High-Pressure Torsion

Microstructure Evolution during High-Pressure Torsion in a 7xxx AlZnMgZr Alloy

Microstructure and microhardness evolution of Ti-10V-2Fe-3Al alloy under tensile/torsional deformation modes

Strength, damage and fracture behaviors of high-nitrogen austenitic stainless steel processed by high-pressure torsion

Microstructural Evolution and Mechanical Properties of Ti-22Al-25Nb Alloy Fabricated by High-Pressure Torsion under Ageing Treatment

The effect of high pressure torsion on structural refinement and mechanical properties of an austenitic stainless steel

The nanoscale mechanisms of strengthening and ductility enhancement in an Al–Mg–Si–Mn alloy on processing by high-pressure torsion

Influence of high-pressure torsion on mechanical properties and microstructural evolution in 2197 Al-Li alloy

Single Parameter Controlling the Substructure and the Hardening by Martensitic Transformation

Thermal Stability of Ultrafine-Grained Pure Titanium Processed by High-Pressure Torsion

Microstructure evolution in ultrafine-grained interstitial free steel processed by high pressure torsion