Abstract:Ultra-short pulse laser interaction with diamond materials has attracted extensive interest in micro- and nano-machining, especially for the fabrication of micro tools, because of the straightforward method and high precision. Thanks to the development of chemical vapor deposition (CVD) technology, high-quality CVD diamonds are employed in more varieties of tools as performance-enhancing coatings. The purpose of the experiments reported here was to explore the machinability of CVD diamond coating under the irradiation of femtosecond (fs) pulsed laser. The factor-control approach was adopted to investigate the influence of scanning speed, single pulse energy and repetition rate on the surface quality and carbon phase transition of CVD diamond coating. The material removal rate and surface roughness were evaluated. The interaction mechanism of scanning speed, single pulse energy, and repetition rate were discussed, and the fs laser ablation threshold of CVD diamond coating was calculated. It was demonstrated that two ablation mechanisms (weak and intensive) were in existence as evidenced by the distinct surface morphologies induced under different processing conditions. A strong dependence on the variation of scanning speed and pulse energy is identified in the examination of surface roughness and removal rate. Lorentzian–Gaussian deconvolution of Raman spectra illustrates that fs laser irradiation yields a strong modification effect on the coating and release the compressive stress in it. Furthermore, a newly defined parameter referring to the fs laser energies applied to unit volume was introduced to depict the degree of ablation and the Taguchi method was used to figure out the significance of different parameters. The ablation threshold of CVD diamond coating at the effective pulses of 90 is calculated to be 0.138 J/cm2.

Preparation of Nano-Crystalline Diamonds Using Pulsed Laser Induced Reactive Quenching

Nano-Crystallite Preparation by Pulsed-Laser Induced Reaction at Liquid-Solid Interface

Synthesis of Nano-Polycrystalline Diamond under High Pressure and High Temperature

Experimental Parametric Investigation of Nanosecond Laser-Induced Surface Graphitization of Nano-Crystalline Diamond

Nanosecond pulsed laser-processing of CVD diamond

Graphite to ultrafine nanocrystalline diamond phase transition model and growth restriction mechanism induced by nanosecond laser processing

Study on Femtosecond Laser Processing Characteristics of Nano-Crystalline CVD Diamond Coating

Pulsed Laser Scanning Deposition of Diamondlike Thin Films

Growth of highly oriented graphite by ultraviolet nanosecond pulsed laser ablation of monocrystalline diamond

High quality nanocrystalline diamond films grown by RF-HFCVD

Highly Transparent Nanocrystalline Diamond Films On Quartz Substrates

Nano-crystalline Diamond Films Synthesized at Low Temperature and Low Pressure by Hot Filament Chemical Vapor Deposition

Processing of diamond applying femtosecond and nanosecond laser pulses

Controllable preparation of bare nano-diamonds through femtosecond laser ablation in liquid

Cryogenic assisted femtosecond laser ablation of polycrystalline diamond

Raman Study of the Diamond to Graphite Transition Induced by the Single Femtosecond Laser Pulse on the (111) Face

Preparation and Characterization of Nanostructured Film of Graphitized Diamond Crystallites for Field Electron Emission

The crack propagation and surface formation mechanism of single crystalline diamond by a nanosecond pulsed laser

Synthesis of nanocrystalline cubic zirconia using femtosecond laser ablation

Ablation Threshold Measurement and Chemical Modification of UV Nanosecond Laser Micromachining of Polycrystalline Diamond

Nano-Graphite Synthesized by Explosive Detonation and Its Application in Preparing Diamond under High-Pressure and High-Temperature