Abstract:The surface chemical modification for the vapour grown carbon fibers (VGCF) produced with the catalytic dehydrogenation of hydrocarbon have been performed by concentrate nitric acid (65%similar to 68%) for various times in order to extend the practical application in composite materials. The structure of VGCF has been characterized by XRD technique. The XRD results show that the graphite crystal structures of VGCF are transformed upon modification, and the extent of transformation is a function of modification time. The BET results indicate that through the modification the S-BET of VGCF veries, and as the long modification time of 120 min is used. the SBET of VGCF decreases distinctly. The FTIR analyses illuminate that due to the modification the different functional oxygen-containing groups are grown on these surfaces of VGCF, and the total amount of the oxygen-containing groups increases with the modification time. In addition, the profiles of temperature programmed reduction (TPR) display that more than two kinds of oxygen-containing functional groups exist on the surfaces of VGCF and the total amount of oxygen for these oxygen-containing functional groups obtained is more than 2 mmol center dot g(-1). The inicrocalorimetric measurements of NH3 adsorption indicate that the strength and the amount of the functional groups of surface acids increase with the modification time. The transmission electron microscopy (TEM) shows that during modification no damage is observed on these surfaces of the VGCF. The experiments of absorbed oil value (AOV) exhibite that the AOV decreases sharply whereas the hydrophilicity of VGCF increases. Double fluid method for the measurements of the contact angles shows that after modification the surface energy (SE) of VGCF increases apparently. The FTIR measurements of the modified VGCF treated with the titanate coupling agent indicate that the bonding abilities between modified fibers surface and coupling agent are enhanced.

Preparation of vapor growth carbon fibers by benzene pyrolysis

Growth of well-crystallized segmented graphite nanofibers by catalytic chemical vapor deposition

Surface Modification And Characterization Of Vapor Grown Carbon Fibers

Observation and Explanation of a Kind of New Large Vapor-Grown Carbon Fibers ( VCGF )

Preparation and Growth Mechanism of Carbon Nanotubes Via Catalytic Pyrolysis of Phenol Resin

In situ growth of CNTs on carbon fiber by chemical vapor deposition

Preparation of Carbon Materials by Vapor Deposition with Fe 3+ -Modified Nickel Foam from Biomass Pyrolysis Gas

Synthetic Hierarchical Nanostructures: Growth of Carbon Nanofibers on Microfibers by Chemical Vapor Deposition

Preparation of C/C Composites by Thermal Gradient Chemical Vapor Infiltration with Vaporized Kerosene As a Precursor

Mechanism of carbon nanotube growth in expanded graphite via catalytic pyrolysis reaction using carbores P as a carbon source

RESEARCH ONPROCESS PARAMETERS FORCARBON NANOTUBES PREPARATION IN INDUSTRIAL VICE-PRODUCTS

Effect of Growth Time on the Morphologies of Vapour Grown Carbon Fibres and A Suggested Mechanism of Growth

GROWTH CHARACTERS AND MODEL OF PYROLYTIC CARBON IN CHEMICAL VAPOR INFILTRATION PROCESS

Carbon Fibers Prepared via Solution Plasma-Generated Seeds

Buliding microstructures of organized carbon nanotubes by chemical vapor deposition

Pyrolytic Synthesis of Conical Carbon Fibers with Carbon Nanotube Tips on Carbon Substrates

Growth mechanism and influences from kinetic factors on carbon materials with Cu and silica substrates during atmospheric pressure chemical vapor deposition

High-Yield Production of Multi-Walled Carbon Nanotubes by Catalytic Decomposition of Benzene Vapor

Chemical Vapor Deposition Growth of Graphene using Other Hydrocarbon Sources