Abstract:In recent years, rubber toughened polypropylene (PP) blends have been extensively investigated with special regard to the importance of PP matrix properties (e.g., crystal morphology and structure) in tailoring the toughening efficiency. Unfortunately, although high melt flowability is indispensable to the processing of polymers into complex thin-wall products, it remains a huge challenge to achieve a marvelous balance between stiffness and toughness in the blends with relatively low matrix molecular weight. Herein, taking PP/EPR (ethylene-propylene copolymer) blends as an example, the combined effects of matrix molecular weight and crystallinity on the mechanical properties of PP/EPR blends have been examined in both experiment and theory. The experimental results show that decreasing molecular weight leads to significant deterioration in notched impact toughness, tensile strength and Young's modulus. Impressively, the toughness loss caused by the decrease of molecular weight can be well-compensated by a slight reduction in the matrix crystallinity, without evidently sacrificing the strength and modulus, demonstrating an improved stiffness-toughness balance. Theoretical analysis indicates that the impact toughness of PP/EPR blends is heavily dependent on the chain entanglement density (v e ) of PP matrix, and a linear relationship between critical interparticle distance (ID c ) and the v e 1/3 has been verified from both experiment and theory. Moreover, it is interesting to find that decreasing matrix crystallinity can increase the v e of low-molecular-weight PP matrix, which enables the effective toughening at lower concentration of EPR and thus gives rise to less loss in the strength and modulus. We believe this work not only gives a new insight into the role of chain entanglement in the toughening but also provides a promising guidance for the design of high-performance PP with high melt flowability.

Impact strength of PP/EPDM blend

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Mechanical properties and structural characteristics of dynamically photocrosslinked PP/EPDM blends

Toughened poly(butylene terephthalate) by epoxided ethylene-propylene-diene-rubber

Dynamically photocrosslinking of polypropylene/EPDM blends as a thermoplastic elastomer

Polymer Blends of Pbt and Pp Compatibilized by Epoxidized Ethylene Propylene Diene Rubber

Mechanical properties, morphological structure, and thermal behavior of dynamically photocrosslinked PP/EPDM blends

Combined effects of matrix molecular weight and crystallinity on the impact toughness of PP/EPR blends: The role of chain entanglement

Toughening of Polystyrene with Ethylene-Propylene-Diene Terpolymer(EPDM) Compatibilized by Styrene-Butadiene-Styrene Block Copolymer(SBS)

Toughening with Little Rigidity Loss and Mechanism for Modified Polypropylene by Polymer Particles with Core–shell Structure

Toughening of Poly(ethylene Terephthalate) and Optimizing of the Compatibilization Between PET and EPDM by Functionalized EPDM

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Toughening Mechanism of Polypropylene Bends with Polymer Particles in Core-Shell Structure: Equivalent Rubber Content Effect Related to Core-Shell Interfacial Strength

Balanced toughening and strengthening of ethylene–propylene rubber toughened isotactic polypropylene using a poly(styrene-b-ethylene–propylene) diblock copolymer

Brittle-tough transition in PP/EPDM blends: effects of interparticle distance and temperature

Fabrication and toughening mechanism of high toughness PP/SEBS/HDPE blends with core‐shell particles

Toughening PET/PC Blends with Ethylene-propylene-diene Rubber

Mechanical Properties and Thermal Behaviors of Dynamically Photocrosslinked PP/EPDM Blends

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Study on Toughening Mechanism of Low Molecular Weight PC/PP Blend