Abstract:Poly(ethylene 2,5-furandicarboxylate) (PEF) is a fully biobased rigid polyester characterized by a high tensile modulus and strength. Poly(butylene adipate-co-terephthalate) (PBAT) is a petroleum-based flexible polyester. In this study, a series of PBAT/PEF blends with 1-50 wt% PEF contents were directly prepared by a melt blending method. The morphologies, thermal properties, crystal structures and mechanical properties of the blends were investigated. The SEM results showed that PEF was uniformly dispersed in the PBAT phase, which indicated that PBAT and PEF had good compatibility. Also, the PBAT/PEF blends displayed typical sea-island morphology structures, in which PBAT acted as a continuous phase and PEF was a discrete phase. The ATR-FTIR results showed that there was no interfacial bonding between PBAT and PEF in the blends. The TGA results displayed that thermal stability slightly deteriorated from 385.5 degrees C to 371.7 degrees C with increasing PEF content. The DSC results indicated that the blends had two T(g)s, corresponding to those of PBAT and PEF. The WAXD results showed that PEF did not change the crystal structure of PBAT and was amorphous in the blends. All the PBAT/PEF blends exhibited toughness behavior, with high elongation at break and impact strength. In particular, when the content of PEF was 1%, 3%, 5% or 7%, the blends showed excellent elongations at break, which were higher than those of PBAT (1005.8 +/- 114.2%) and PEF (6.0 +/- 0.4%). When the content of PEF was 40%, the impact toughness of the blends was 91.0 +/- 8.7 kJ m(-2), which was 4.5 times that of PBAT and 13 times that of PEF. These findings have important implications for the application of PEF and the design of blend materials with high toughness.

Toughened poly(butylene terephthalate) by epoxided ethylene-propylene-diene-rubber

Rheological Properties of PET/PA66/Liquid Crystalline Copolyesteramide Blends

Modification of Unsaturated Polyester Resin by HTPB: Effect of Introducing Method of the Rubber

Poly(ethylene 2,5-Furandicarboxylate-mb-poly(tetramethylene Glycol)) Multiblock Copolymers: from High Tough Thermoplastics to Elastomers

Toughening of poly(butylene terephthalate) with epoxidized ethylene propylene diene rubber

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Preparation and Properties of Poly(Ethylene Terephthalate)/Poly(Butylene Terephthalate) Alloys with High Toughness

Polymer Blends of Pbt and Pp Compatibilized by Epoxidized Ethylene Propylene Diene Rubber

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Toughening PET/PC Blends with Ethylene-propylene-diene Rubber

Toughening of Poly(ethylene Terephthalate) and Optimizing of the Compatibilization Between PET and EPDM by Functionalized EPDM

Thermal and Mechanical Properties of Poly(butylene Terephthalate)/epoxy Blends

Toughening of Polylactide with Epoxy-Functionalized Methyl Methacrylate-Butadiene Copolymer

A Novel Biobased High Toughness PBAT/PEF Blends: Morphology, Thermal Properties, Crystal Structure and Mechanical Properties

Fabrication of poly(ethylene terephthalate)/polypropylene-based elastomer blends with balanced stiffness-toughness: The effect of reactive compatibilization

Toughened Blend of Polycarbonate and Epoxidized Ethylene Propylene Diene Rubber

Synergistic Effect of Polycarbonate on Reactive Core-Shell Particles Toughened Poly (butylene Terephthalate)

Influence of the Degree of Grafting on the Morphology and Mechanical Properties of Blends of Poly(butylene Terephthalate) and Glycidyl Methacrylate Grafted Poly(ethylene‐co‐propylene) (EPR)

Toughening of Polystyrene with Ethylene-Propylene-Diene Terpolymer(EPDM) Compatibilized by Styrene-Butadiene-Styrene Block Copolymer(SBS)

Tough and Thermostable Polybutylene Terephthalate (PBT)/Vitrimer Blend with Enhanced Interfacial Compatibility

Investigation of the Properties of Epoxy-Functionalized Acrylonitrile-butadiene-styrene Toughened Poly (butylene Terephthalate) and Its Blends