Abstract:The instantaneous rotational speed (IRS) of a rotating machine is key information to understand the machine operation and diagnose the potential faults. A novel nonprojection fringe vision-based system was proposed to realize the measurement of IRS, which was simply composed of an artificial linearly varying-density fringe pattern (LVD-FP) as a sensor and a high-speed camera as a detector. The designed LVD-FP, printed by a normal printer, was pasted around the surface of the rotary shaft completely along the fringe density change direction. Part of the LVD-FP was captured by the high-speed camera. The fringe period density of each imaged LVD-FP intensity changed due to the rotation of the shaft, from which the rotational angle could be obtained. Subsequently, both the instantaneous angular speed (IAS) between two adjacent frames and the IRS could be accurately and efficiently obtained. The influences of the key parameters of the proposed system on the measurement accuracy were investigated by simulations and experiments. Both the simulation and experimental results demonstrated that the proposed system can accurately measure the IAS and correctly track the wide range IRS with the advantage of noncontact and cost effective. In addition, the rotation direction of the shaft could be directly obtained from the sign of the IRS curves. Therefore, the proposed system could provide a novel vision-based approach for IRS measurement, especially when the conventional speed sensor cannot be installed on the rotary shaft. The good performance of the system in IRS measurement makes it attractive for fault diagnosis of rotating machinery.

Study of measuring rotation angles in high-speed with laser interference

&Lt;title>measuring Rotation Angles in High Speed with Laser Interference</title>

Research on high-speed and non-contact angle detection based on laser measurement

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

The Study Of Measuring Rotating Angle With Double-Frequency Laser And Wedge-Plate Interference

A New Method of Measuring Rotation Rate with Laser Interference Technology

Investigation of Heterodyne Interferometer Technique for Dynamic Angle Measurement: Error Analysis and Performance Evaluation

A High-Frequency Angular Vibration Calibration System Based on Phase Modulated Laser Interferometer Technique

Research on angular vibration measurement system based on heterodyne interference

Research for new method for high-precision non-contact measurement of rotate speed

Angle Measurement with Determining the Direction of Angle Rotation Based on Laser Self-Mixing Interferometry

Measurement of Instantaneous Rotational Speed Using Double Sine-Varying-density Fringe Pattern

Measurement of Rotation Speed of High-Speed Rotating-Mirror Camera

High-speed High-Resolution Heterodyne Interferometer Using a Laser with Low Beat Frequency.

Study on High Speed Dual-Frequency Laser Interferometry in Two Longitudinal Modes

Measurement Method for Roll Angular Displacement with A High Resolution by Using Diffraction Gratings and A Heterodyne Interferometer

Non-Contact Ultralow Rotational Speed Measurement of Real Objects Based on Rotational Doppler Velocimetry

Dual-frequency Laser Interferometry of Rotating Angle Measurement with a Grating Wedge-Plate

New Method of Dynamic Rotation Rate Test

New Advance In Laser Interferometry