Abstract:This paper conducts compressive strength tests on foam concrete prepared under four factors and three levels through the design of orthogonal experiments. It delves into the phase change rules of the load–displacement curves obtained under various mix proportions. Furthermore, based on the 1-day and 3-day compressive strength values, the study explores different mix proportion results using range analysis and variance analysis methods, thereby determining the optimal mix proportion that can satisfy the maximum 1-day and 3-day compressive strength values. The results indicate that the compression process of rapid-hardening foam concrete includes four stages: initial compaction stage, elastic stage, yielding stage, and plateau stage, with each stage having different causes. Additionally, the sensitivity sequence of factors affecting the 1-day and 3-day compressive strength of rapid-hardening foam concrete is respectively rapid sulfoaluminate cement (α) > water-reducing agent content (δ) > foam content (β) > water-cement ratio (γ) and rapid sulfoaluminate cement (α) > water-cement ratio (γ) > foam content (β) > water-reducing agent content (δ). With 100% sulfoaluminate cement content, the 1-day and 3-day compressive strength values can reach 1.7054 and 2.5471 MPa, respectively, which are 13 times and 7 times the minimum values of 1-day and 3-day compressive strength under other admixtures. The analysis shows that the content of rapid sulfoaluminate cement has the most significant effect on the 1-day and 3-day compressive strength of rapid-hardening foam concrete, with foam content having the least impact on 1-day compressive strength and water-reducing agent content having the least impact on 3-day compressive strength. By integrating range analysis and variance analysis, the optimal mix proportion that simultaneously satisfies the maximum 1-day and 3-day compressive strength is determined to be 100% content of rapid-hardening sulfoaluminate cement, 4% foam content, 0.55% cement ratio, and 0.12% admixture content. Overall, this study provides theoretical support for the research and development of new rapid-hardening foam concrete materials and has significant practical implications for the emergency repair and construction of infrastructure projects.

Two-Hour Zero Slump Loss, High-Strength Pumpable Concrete—An Application Case in Dam Structure

EXPERIMENTAL ENHANCEMENT STUDY ON DURABILITY OF CONCRETE IN WHARF PROJECT

Changes in Rheology of Concrete Induced by Ultra High-rise Pumping Process

Preparation of C80~C100 High Performance Concrete and the Ultrahigh Pumping Technology

Study on performance of high strength pumping concrete compounded by fly ash composite powder under low water-cement ratio

Research On The Mixture Ratio Design Of Ultra-High Strength Concrete

Mix Design and Engineering Application of C80 High-Performance Silicon Fume Concrete

Research on Preparation Technique of C100 Ultra-High Performance Self-Compaction Concrete

Development and Application of High Performance Concrete and Ultra-high Performance Concrete

Design of self-compacting ultra-high performance concrete (SCUHPC) towards to the cementitious materials packing optimization

Pumping Process of High Strength Self-consolidating Concrete in the Construction of Skyscraper

Optimal Mix Design and Mechanical Properties of Rapid-Hardening Foam Concrete

Research on the High Strength Pumping Concretes with Grade-Ⅱ fly Ash and Slag Micro Powder

Experimental study on strength and abrasion-resistance enhancement admixture

Optimal Design and Performance of Concrete with Function Component in Marine Environment

Influence of Pumping on the Resistivity Evolution of High-Strength Concrete and Its Relation to the Rheology

Design and Control Shrinkage Behavior of High-Strength Self-Consolidating Concrete Using Shrinkage-Reducing Admixture and Super-Absorbent Polymer

Research on Ultrahigh Pumpability of C80 HS & HP Concrete

Concrete with ultra-large volume, high strength and low hydration heat

Development of a rapid hardening ultra-high performance concrete (R-UHPC): From macro properties to micro structure

Research on the C30 and C40 concretes prepared with low-quality raw materials