Abstract:Remote-pumped concrete for infrastructure construction is a key innovation of the mechanized and intelligent construction technology. This has brought steel-fiber-reinforced concrete (SFRC) into undergoing various developments, from conventional flowability to high pumpability with low-carbon features. In this regard, an experimental study on the mixing proportion design and the pumpability and mechanical properties of SFRC was conducted for remote pumping. Using the absolute volume method based on the steel-fiber-aggregate skeleton packing test, the water dosage and the sand ratio were adjusted with an experimental study on reference concrete with the premise of varying the volume fraction of steel fiber from 0.4% to 1.2%. The test results of the pumpability of fresh SFRC indicated that the pressure bleeding rate and the static segregation rate were not the controlling indices due to the fact that they were far below the limits of the specifications, and the slump flowability fitted for remote-pumping construction was verified by a lab pumping test. Although the rheological properties of the SFRC charactered by the yield stress and the plastic viscosity increased with the volume fraction of steel fiber, those of mortar used as a lubricating layer during the pumping was almost constant. The cubic compressive strength of the SFRC had a tendency to increase with the volume fraction of steel fiber. The reinforcement effect of steel fiber on the splitting tensile strength of the SFRC was similar to the specifications, while its effect on the flexural strength was higher than the specifications due to the special feature of steel fibers distributed along the longitudinal direction of the beam specimens. The SFRC had excellent impact resistance with an increased volume fraction of steel fiber and presented acceptable water impermeability.

Pumping Process of High Strength Self-consolidating Concrete in the Construction of Skyscraper

Preparation of C80~C100 High Performance Concrete and the Ultrahigh Pumping Technology

Research on Ultrahigh Pumpability of C80 HS & HP Concrete

Research on Preparation Technique of C100 Ultra-High Performance Self-Compaction Concrete

Changes in Rheology of Concrete Induced by Ultra High-rise Pumping Process

Brief Introduction on the Application of High-Performance Concrete Preparation Technology in Ultra-High-Rise Buildings

HOW TO SAFELY AND EFFICIENTLY APPLY CONCRETE PUMPING AGENT

Compressive Behavior and Strength Prediction of Ultra-High Performance Concrete Confined by Normal and High Strength Steel Hoops

Performance Research on Ultra-High Performance Self-Compaction Concrete (Uhp-Scc)

SIMULATION ANALYSIS FOR MECHANIC BEHAVIOR OF CONCRETE-FILLED STEEL TUBULAR ARCH BRIDGE DURING THE COURSE OF CORE CONCRETE PUMPING

Application Of Self-Consolidating Concrete In Beijing

Hardened property changes due to the pumping process of self-consolidating concrete

Concrete Pumpability Assessment with Rheology-based Analytical Model

Simulation Analysis of Pumping Characteristics for High-Altitude Concrete

Influence of Pumping on the Resistivity Evolution of High-Strength Concrete and Its Relation to the Rheology

The Study on Early-Age Expansion and Shrinkage Model of Massive Self-Compacting Concrete Pumped in Steel Tube Column

Research On The Mixture Ratio Design Of Ultra-High Strength Concrete

Application Research of C80 High-Performance Concrete for the Guangzhou East Tower

Experimental Study on the Performance of Steel-Fiber-Reinforced Concrete for Remote-Pumping Construction

Study on Ultra-high Performance and Self-compacting Concrete and Its Super-high Pumping Technology

Study on performance of high strength pumping concrete compounded by fly ash composite powder under low water-cement ratio