Abstract:The quality of concrete surfaces is negatively affected by the plateau climate. The purpose of present study was to investigate the mechanism of the climate effect on the microstructures and properties of concrete surfaces under different exposure conditions. Scanning electron micro-scopy, X-ray diffraction, thermogravimetry, nitrogen adsorption porosimetry, mercury intrusion porosimetry, and microhardness tests were used for microstructure analysis. Rebound strength and abrasion resistance tests were conducted to assess the mechanical properties. Tests of sorp-tivity under various absorption conditions, chloride ion impenetrability after vacuum saturation and immersion, and deicing salt scaling with natural and standard freeze-thaw cycling, were conducted to assess the durability. The results showed that both cement hydration and micro-structure densification of the exposed concrete surfaces were lower than those of the concrete interior, leading to worse mechanical properties and durability. The rapid moisture loss, rather than the low temperature, was the dominant cause of the weak surface layer, with a depth be-tween 10 mm and 15 mm. The performance of a south-oriented surface was slightly better than that of a north-oriented surface, which was due to the stronger solar radiation for the former surface. However, the difference was so small that it could be ignored. Furthermore, the concrete sorptivity under the conditions of semi-immersion and vacuum saturation was lower in the high-altitude regions, which was due to the higher evaporation and smaller pressure difference after vacuum absorption. Thus, significant errors were expected in all tests of chloride ion impene-trability assessment conducted in high-altitude regions.

Simulation Analysis of Pumping Characteristics for High-Altitude Concrete

Changes in Rheology of Concrete Induced by Ultra High-rise Pumping Process

Effect of Low Atmospheric Pressure on Air Entrainment in Cement-Based Materials: an On-Site Experimental Study at Different Elevations

SIMULATION ANALYSIS FOR MECHANIC BEHAVIOR OF CONCRETE-FILLED STEEL TUBULAR ARCH BRIDGE DURING THE COURSE OF CORE CONCRETE PUMPING

Simulation Analysis of Pumping and Its Variability for Manufactured Sand Concrete

Study on Modeling and Simulation of Concrete Pump Hydraulic System

Influence of Pumping on the Resistivity Evolution of High-Strength Concrete and Its Relation to the Rheology

Preparation of C80~C100 High Performance Concrete and the Ultrahigh Pumping Technology

Numerical Study on Concrete Pumping Behavior via Local Flow Simulation with Discrete Element Method

Pumping Process of High Strength Self-consolidating Concrete in the Construction of Skyscraper

Experiment and simulation on high-pressure equation of state for concrete

Investigation on air-voids structure and compressive strength of concrete at low atmospheric pressure

Concrete Pumpability Assessment with Rheology-based Analytical Model

Research on Ultrahigh Pumpability of C80 HS & HP Concrete

Experimental study on C80 high strength pumped concrete

Study on performance of high strength pumping concrete compounded by fly ash composite powder under low water-cement ratio

Hardened property changes due to the pumping process of self-consolidating concrete

Microstructures and Properties of Concrete Surfaces under Different Exposure Conditions in Complex Natural Environments of High-Altitude Regions

Effect of pumping process on the properties of 3D printed concrete containing air-entraining agent

Characterization of surface hardness and microstructure of high performance concrete

Influence of high altitude on the strength of aerated concrete