Abstract:Commercial three-way catalysts with high-activity and long-term durability are critical for the aftertreatment of compressed natural gas vehicle exhausts to meet increasingly stringent policy requirements, but high concentrations of CH4 and H2O in the exhaust gas make the catalyst susceptible to deactivation. In this work, a series of commercially deactivated and aged honeycomb Pt/Pd/Rh/CeO2-ZrO2/Al2O3 catalysts were obtained by dry-aging, hydrothermal-aging and engine bench-aging methods, and the effects of aging conditions on catalytic performance, surface composition and microstructure evolution were investigated. The combinations of H2-TPR, XRD, Raman, HRTEM, XPS and in situ DRIFTS of CO/CH4 characterizations confirmed that the stability of CeO2-ZrO2 solid solution structure is a key factor affecting the catalytic activity and durability. Hydrothermally-aged catalyst has a relatively stable CeO2-ZrO2 solid solution structure, which ensures a high dispersion of precious metal particles in the form of small particles on the catalyst surface. Dry-aged catalyst shows that more CeO2 crystals have been segregated from CeO2-ZrO2 solid solution, resulting in most precious metal particles in the form of agglomerates. For the deactivated catalysts after engine bench aging, the microstructure was significantly changed with a large number of CeO2 crystals detached from CeO2-ZrO2 solid solution, resulting in more active sites of Platinum Group Metal (PGM) being encapsulated. In situ DRIFTS of CH4 experiments showed that the process of generation and depletion of intermediate species (e.g., methoxy, formate and bicarbonate species) is a matching process. For the deactivated catalysts with fewer active sites, the subsequent reaction steps of these intermediate species to CO2 and H2O are hindered by the accumulation of stable formate and bicarbonate intermediate species.

Initial deactivation of HDM catalysts with residual feedstocks

Deactivation and Regeneration of Raney-Ni Catalyst During Multiphase Dehydrogenation of Cyclohexane

Experimental Determination on the Deactivation Kinetics of Residue Hydroprocessing in a Two-Stage Fixed Bed Loaded with HDM and HDS Catalysts

Study on Deactivation by Sulfur and Regeneration of Pd/C Catalyst in Hydrogenation of N-(3-nitro-4-methoxyphenyl) Acetamide

Deactivation and Regeneration of Nano-Assembled Pd/C Catalyst for AMA Synthesis

Comparative Study on Hydrotreating of Venezuela De-Asphalted Oil: Conversion Behavior of Heteroatom Compounds and HDM Catalyst Deactivation

The characterization of the deactivated C2 hydrogenation Pd-Ag/Al2O3 catalyst

Study On The Cause Of Deactivation Of Pd/C In The Hydrodechlorination Reaction

Deactivation Mechanism and Feasible Regeneration Approaches for the Used Commercial NH3-SCR Catalysts

Effect of Catalyst Deactivation on the Energy Consumption of Gasoline–Diesel Hydrotreating Process

Regeneration Behaviors of Hydroisomerization Catalysts

Activation and Deactivation of the Commercial-Type CuO-Cr2O3-Fe2O3 High Temperature Shift Catalyst

Heavy oil atmospheric residue: HDS performance and life test using ARDS catalysts system

Thermal deactivation mechanism of the commercial Pt/Pd/Rh/CeO2-ZrO2/Al2O3 catalysts aged under different conditions for the aftertreatment of CNG-fueled vehicle exhaust

DEACTIVATION OF THE CATALYST FOR TWO-STAGE HYDROGENATION OF 3-HYDROXYPROPIONALDEHYDE TO 1,3-PROPANEDIOL

Effect of Nitrogen Compounds on the Running Stability of Ultra-Deep Hydro-desulfurization Diesel Catalyst

Dispersed Pd/alumina catalyst with finite iodine entry for boosted CO purification and dimethyl carbonate synthesis

Deactivation and Regeneration of Catalyst for Steam Reforming of Bio-Oil to Produce Hydrogen

Correlation of Deactivation of Ni-Mo-W/Al 2 O 3 During Ultra-Low-Sulfur Diesel Production with Surface Carbon Species

Deactivation of commercial SCR catalyst used in 1000MW coal-fired power plant

Investigation on the deactivation of Pt/H-ZSM-22 catalyst for long-chain alkane isomerization