Abstract:Tsinghua University's low-temperature nuclear heating reactor (NHR) primarily focused on heating supply in its initial design. However, utilizing the reactor solely as a heat source limits its economic efficiency and competitiveness. To further broaden the application scope of the NHR200-II reactor, several modifications were implemented based on the original design. These include replacing the vertical steam generator with a horizontal one, which facilitates easier discharge of fouling, and add a superheater to enhance the thermal parameters values of the secondary loop to generate the desired superheated steam for industrial users. A comprehensive numerical modeling approach was employed to establish the primary loop, intermediate loop, secondary loop, and the passive residual heat removal system (PRHR) models for the NHR200-II reactor. The computational results indicate that the novel superheated steam supply system of the NHR200-II reactor exhibits good power control capability within the range of 50%-100% of the full power, with a step size of 10%. Moreover, the reactor demonstrates the ability to operate between 50% and 100% of the full power for a 24-h period, meeting the superheated steam demand of an industrial plant in a Chinese demonstration project. Furthermore, in the event of a reactor shutdown, the passive residual heat removal system efficiently removes the residual heat from the reactor core, thus preventing core meltdown accidents. The power between the reactor core and the superheated steam supply system could be well matched, and there could also be effective power distribution and coordination among the three heat exchangers. These numerical simulation results not only verify the new design of NHR200-II, but also contribute to the advancement of a demonstration project for a low-temperature nuclear heating reactor.

Experimental study on 5 MW Nuclear Heating Reactor Refrigeration

Experimental-Study And Operation Experiences Of The 5 Mw Nuclear Heating Reactor

Operational and Experimental Study of Nhr-5

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

The Design Characteristics And Construction Experiences Of The 5 Mwt Nuclear Heating Reactor

Study of a Novel Hybrid Refrigeration System for Industrial Waste Heat Recovery

Investigation on thermohydraulic characteristics of novel superheated steam supply system for low temperature nuclear heating reactor

Some Features Of The Nuclear Heating Reactor (Nhr) Design In China

Research on Power Regulation and Distribution of the Improved NHR200-II Low Temperature Nuclear Heating Reactor

Investigation on heat-electricity cogeneration with nuclear heating reactors

Study on dynamic character of thermohydraulic test system of 5MW low temperature nuclear heating reactor

Thermo-hydraulic Experimental Validation of an Integrated Modular Small Reactor Operating in Full Power Natural Circulation

Chinese Nuclear Heating Test Reactor And Demonstration Plant

Experimental Simulation Study On Start-Up Of The 5 Mw Nuclear Heating Reactor

Reactor physics analysis of nhr200-ii heating reactor using rmc monte carlo code

Economic Analysis of Process Steam and Electricity Generation by a 200MW NHR

Development Progress and Prospect for Industrial Application of the 200MW Low Temperature Nuclear Heating Reactor

Thermalhydraulic Investigation Using a Test Facility Simulating 200 MW Integral Heating Reactor

Experimental simulation on transit process of the 5MW nuclear reactor

Numerical Simulation of the Transient Flow Characteristics and Thermal Stratification Phenomena in the Passive Residual Heat Removal System of NHR-200-II

Simulation Study of Nuclear Heating Reactor Control Method in Slight Boiling Operation Mode