Abstract:The tribological behaviors of diamond and diamond-like carbon (DLC) films play a major role on their machining and mechanical applications. In this study, diamond and diamond-like carbon (DLC) films are deposited on the cobalt cemented tungsten carbide (WC–Co) substrate respectively adopting the hot filament chemical vapor deposition (HFCVD) technique and the vacuum arc discharge with a graphite cathode, and their friction properties are evaluated on a reciprocating ball-on-plate tribometer with counterfaces of silicon nitride (Si3N4) ceramic, cemented tungsten carbide (WC) and ball-bearing steel materials, under the ambient air without lubricating condition. Moreover, to evaluate their cutting performance, comparative turning tests are conducted using the uncoated WC–Co and as-fabricated CVD diamond and DLC coated inserts, with glass fiber reinforced plastics (GFRP) composite materials as the workpiece. The as-deposited HFCVD diamond and DLC films are characterized with energy-dispersive X-ray spectroscopy (EDX), scanning electron microscope (SEM), X-ray diffraction spectroscopy (XRD), Raman spectroscopy and 3D surface topography based on white-light interferometry. Furthermore, Rocwell C indentation tests are conducted to evaluate the adhesion of HFCVD diamond and DLC films grown onto WC–Co substrates. SEM and 3D surface topography based on white-light interferometry are also used to investigate the worn region on the surfaces of diamond and DLC films. The friction tests suggest that the obtained friction coefficient curves that of various contacts exhibit similar evolution tendency. For a given counterface, DLC films present lower stable friction coefficients than HFCVD diamond films under the same sliding conditions. The cutting tests results indicate that flank wear of the HFCVD diamond coated insert is lower than that of DLC coated insert before diamond films peeling off.

Deposition of DF on cemented tungsten carbide inserts with an electroplating multiple nickel and buckytube layer

Deposition of diamond film on ferrous alloys substrate with Au/Cu interlayer by hot-filament chemical vapor deposition

Deposition of Diamond Film on Ferrous Alloys Substrate with Au/Cu Interlayer by HFCVD

Deposition of Smooth Diamond Films with High Adhesive Strength on WC-Co Inserts and Their Cutting Performance in Turning GFRP

Growth of Nanocrystalline Diamond Films on Co-Cemented Tungsten Carbide Substrates by Hot Filament CVD

Deposition and friction properties of ultra-smooth composite diamond films on Co-cemented tungsten carbide substrates

Fabrication and application of nano–microcrystalline composite diamond films on the interior hole surfaces of Co cemented tungsten carbide substrates

Study on deposition and characterization of diamond coated cylinder-shaped substrate

Deposition and Characterization of Nanocrystalline Diamond Films on Co-cemented Tungsten Carbide Inserts

Diamond Deposition on WC–Co Substrate with Amorphous SiC Interlayer

Interfacial characterization of diamond thin film coated cemented carbide tool

Uniform Deposition of Chemical Vapor Deposition Diamond Films on Slender Tungsten Wires

Synthesis of Nanocrystalline Diamond Films on Smooth Wc-Co Cemented Carbide Substrates

ENHANCEMENT OF ADHESION STRENGTH AND TRIBOLOGICAL PERFORMANCE OF CVD DIAMOND FILMS ON TUNGSTEN CARBIDE SUBSTRATES WITH HIGH COBALT CONTENT VIA AMORPHOUS SiC INTERLAYERS

Deposition of an adherent diamond film on stainless steel using Cr/CrAlN as an interlayer

Deposition and Cutting Performance of High Quality Ultra-fine Grain Diamond Coated Inserts

Fabrication of Inlay Structure Diamond Films on Cu Substrate and the Evaluation of Adhesion Strength

Effects of Chemical Surface Pretreatments on Diamond Coatings on Cemented Tungsten Carbide Substrate

Design and Fabrication of HfC, SiC/HfC and HfC-SiC/HfC Interlayers for Improving the Adhesion Between Diamond Coatings and Cemented Carbides

Study on tribological behavior and cutting performance of CVD diamond and DLC films on Co-cemented tungsten carbide substrates

Deposition of diamond film on steel substrate by precoating an intermediate layer