Abstract:The main requirements of cemented carbides as cutting, machining, and drilling tools are wear resistance, chemical stability at high temperatures, and proper mechanical properties. However, some studies have indicated that the surface temperature of these tools increases locally during the cutting or machining process, which leads to oxidation, compositional change, and tool degradation over time. In addition, these tools are sometimes used in corrosive media such as saline water, etc. Cemented carbides contain carbide and metallic phases; therefore, there is a possibility of severe galvanic corrosion in these composites, which leads to the preferential dissolution of the metallic phase and the remaining carbide skeleton. On the other hand, the corrosion rate of hardmetals depends on the pH of the electrolyte. In alkaline electrolytes, Co passivation occurs; in contrast, WC actively dissolves. This behavior is vice versa in acidic electrolytes. Deposition of hard protective CVD coatings is an appropriate way to protect cemented carbides from environmental damage and oxidative wear. In past studies, it has been mentioned that using single-component coatings such as TiN is unsuitable for improving the cutting performance of such tools due to oxidative degradation of the coating. But the use of modified multilayer coatings has shown a significant improvement in the proficiency and lifespan of these cutting tools. In recent years, CVD TiAlN coatings have replaced the previous generation of hard coatings due to their unique properties. Much research has been carried out on the properties of these coatings, and the effect of different contents of Al and dopants have been reported. Recently, CVD TiSiCN coatings have been introduced as a new generation of hard coating that has attracted the attention of researchers. These composite coatings are one of the promising options for the next generation of wear-resistant coatings due to their ultra-high hardness, wear and oxidation resistance, and excellent performance in the cutting/machining process.

Sustainable super-hard and thick nanodiamond composite film deposited on cemented carbide substrates with an interfacial Al-interlayer

Synthesis and comprehensive synchrotron-based structural analysis of Si-doped nanodiamond composite films deposited on cemented carbide

Nanomechanical and Structural Characteristics of Nanodiamond Composite Films Dependent on Target-Substrate Distance

Wear-resistant and Adherent Nanodiamond Composite Thin Film for Durable and Sustainable Silicon Carbide Mechanical Seals

Unveiling a 72.5 GPa peak hardness in sustainable nanodiamond composite hard coatings via discharge energy control: A nanoindentation-Raman approach

Nanoengineered Polycrystalline Diamond Composites with Advanced Wear Resistance and Thermal Stability

Recent developments in the new generation of hard coatings applied on cemented carbide cutting tools

Study On The Properties Of Diamond Films On Cemented Carbide Substrates By Surface Implantation Pretreatment Process

SiC Interlayer/diamond Coatings Prepared on Cemented Carbide Micro-Tools by High Current DC Extended Arc Chemical Vapor Deposition

Uniform diamond coatings on WC-Co hard alloy cutting inserts deposited by a microwave plasma CVD

Improvement in the universality of high-performance CVD diamond coatings on different WC-Co substrates by introducing multilayered diamond/β-SiC composite

Microwave plasma CVD of diamond films on high concentration alloys: Microstructure, hardness and wear properties

Development and research of nanostructured multilayer composite coatings for tungsten-free carbides with extended area of technological applications

Effect of Coating Thickness on Abrasion and Cutting Performance of NCD-Coated Ball Endmills on Graphite Machining

Comparative Study of Multilayer Hard Coatings Deposited on WC-Co Hardmetals

Analysis of Different Complex Multilayer PACVD Coatings on Nanostructured WC-Co Cemented Carbide

Strategy for achieving high-performance PVD nano-multilayered AlTiN/TiN coated milling tool: Fine platelet-grained WC–Co substrate and interface regulation

Influence of Interlayer Materials on the Mechanical Properties and Thermal Stability of a CrAlN Coating on a Tungsten Carbide Substrate

Interfacial characterization of diamond thin film coated cemented carbide tool

Hardening mechanism and plastic deformation behavior in super-hard AlCrNbSiTiN high-entropy nitride nanocomposite coatings

Effect of diamond layer thickness on tool wear of polycrystalline diamond composites