Abstract:Due to the special fields of aerospace, explosion impact, weapon penetration, and other high-g value acceleration test, the sensor test range and antioverload capability have great requirements. At present, most accelerometer beams with equal Section are used. The existing data prove that the beam structure with variable Section can effectively solve the problem of stress concentration, improve the antioverload capability of acceleration sensor, and increase the system stability through theoretical simulation. This study presents a hybrid-integrated high-precision micro-electromechanical systems (MEMS) ultrahigh-g piezoresistive accelerometer, which is composed of a sensitive structure and an application-specific integrated circuit (ASIC) interface. Based on the traditional constant-section four-beam accelerometer, a variable-section beam is proposed, and the Section size increases linearly with the length of beam. Through finite-element simulation analysis, it is verified that the variable-section beam has the characteristics of reducing stress concentration and can improve the antioverload ability of the accelerometer. The simulation results show that the maximum stress of the structure under 200000 g is 28.34 MPa, and its resonance frequency is 548 kHz. Finally, the processing flow is designed, and the fabrication of MEMS chip is completed. Based on the Taiwan semiconductor manufacturing company (TSMC) 0.35- $mu ext{m}$ process, the ASIC interface is designed and fabricated to process the signal from the sensing element and realize the functions of amplification and filtering. The MEMS chip and ASIC chip are integrated by gold wire bonding, packaged in a stainless-steel shell, and tested by Hopkinson bar. The test results show that the sensitivity of the accelerometer is $0.2747 mu ext{V}$ /g, the nonlinearity is 2.79%, and the full range is 200000 g, and the antioverload capacity is 250000 g.

The Microinstrumentation For Acceleration

The Integrated Micro Self-Adaptive Sampling Acceleration Measurement System

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

A Compact Micromachined Interferometric Accelerometer Based on the Diffraction Grating

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Microchip Controlled Electronic Circuit for Measurement of the Angular Acceleration

A microchip optomechanical accelerometer

A Multi-ranged Micro Accelerometer

A micromachined angular-acceleration sensor for geophysical applications

Design and Experiment of a Hybrid-Integrated Ultrahigh-g Accelerometer With Variable-Section Beam

Design and Simulation of A Multi-Finger Micromechanical Silicon Accelerometer

Design, fabrication and experiment of a MEMS piezoresistive high-g accelerometer

A Hybrid Micro-Accelerometer System with CMOS Readout Circuit and Self-Test Function

Research on High-Resolution Miniaturized MEMS Accelerometer Interface ASIC

Analysis of the self-test characteristics of a micromachined accelerometer

Design and Realization of Comb-Finger Micromechanical Accelerometer

Digital closed-loop micromachined accelerometer based on cascaded multi-stage-noise-shaping ∑?M

A Piezo-Driven Micro-Inclination Stage for Calibration of A Micro-Acceleration Transducer: Structure and Control Strategy

A Low-Power and Robust Micromachined Thermal Convective Accelerometer

One Single Chip Micro Inertial Measurement Unit

A High-Performance Multi-Beam Microaccelerometer for Vibration Monitoring in Intelligent Manufacturing Equipment