Abstract:For high-speed traveling-wave modulator, impedance match, velocity match and low microwave attenuation are important. But they have different effects on bandwidth for different structure and scheme for quantum well electroabsorption modulator and bulk Mach-Zehnder electrooptic modulator. For bulk Mach-Zehnder electrooptic modulator, the longer active waveguide is needed, and at such situation, according to the normalized gain (or modulation reduction factor) the velocity match and impedance match and low microwave attenuation should be well satisfied to achieve good performance. While for the quantum well electroabsorption modulator, limited by the optical loss, short active waveguide must be used. When the device length is largely reduced match requirement is not so strict and it is also difficult to achieve good match. Low terminator electroabsorption modulator is reported recently. Its concept could be inferred from the normalized gain formula. And some technology tendency in traveling-wave electroabsorption and Mach-Zehnder modulator could be also obtained and could explain series of experiment. From calculation and experiment the low impedance and low terminator could expand the bandwidth by slight mismatch. The relation of modulator characteristic impedance, microwave phase velocity and microwave attenuation is not much considered for simplification. The results are useful to design and optimize modulator.

GaAs/GaAlAs travelling-wave directional coupler modulators: II experiment

GaAs/GaAlAs traveling-wave directional coupler optical modulators: I. design

Microwave Characteristics Analysis of Mach-Zehnder GaAs/GaAlAs Traveling-Wave Optical Modulators

Recent Progress on Ultrahigh Speed Optical Modulator

Development of Traveling Wave BOA Optical Switches

Microwave Properties of Coplanar Strips of MQW Mach-Zehnder Modulator with Finite Metallization Thickness and Conductivity

New Designed Mach-Zehnder GaAs Traveling-wave Interferometer Modulators Based on the Analytical Numeral Results of the Method of Line

1X4 Gaas Optical Switch Array with Asymmetric X-Junction

Microwave characteristics analysis of coplanar electrodes in III-V semiconductors traveling-wave modulators

Study of GaAs asymmetric X-junction waveguide hybrid coupler

Different Effects on Bandwidth for Traveling-Wave Quantum Well Electro-Absorption Modulator and Bulk Mach-Zehnder Electric-Opto Modulator

InGaAs/InGaAsP Diffused Quantum Wells Optical Amplifiers and Modulators

Design for the GaAs/GaAlAs cut-off waveguides modulator

High Speed 2×2 Optical Switch Based on Carrier Injection Effect in GaAs/AlGaAs

Cutoff Modulator with Tunable Filtering Characteristic Based on the W Type Waveguide

High Speed 2 x 2 Optical Switch Based on Carrier Injection Effect in GaAs/AlGaAs

Design and Improvement of InP-based Traveling Wave Mach-Zehnder Modulator for Monolithic Integrated with V-cavity Laser

High speed 2×2 optical switch based on the carrier injection

Performance Limitations of a Y-branch Directional-Coupler-based Polymeric High-Speed Electro-Optical Modulator

SOI Based Optical Waveguide Devices with 44gbit/s High Speed

The Optical Waveguide Design Of Quantum Well Electroabsorption Optical Modulator