Abstract:Computer-Aided Design (CAD) tools are extensively used throughout all of the steps in a VLSI design flow. The physical design domain is one of the three domains that are conceptually abstracted in representing a VLSI design flow. This research work focuses on three areas in VLSI physical design domain: clock tree design and buffer insertion, interconnect model order reduction and LVS verification. First, an optimal buffer insertion for clock delay and skew minimization algorithm is developed based on the theory that the minimal clock delay can be obtained by equalizing derivatives of a convex function, and the minimal clock skew can be achieved by equalizing delay functions of different source-to-sink paths. Experimental results show that the presented algorithm achieves both minimal delay and skew in real clock tree design. Further, an automatic clock tree design algorithm is developed for realizing the pre-specified clock arrival time requirements that often occur in an IP block based design environment. In this proposed strategy, planar clock routing and buffer insertion are carried out simultaneously to minimize clock delay and skew, and a full waveform simulation is applied to ensure the signal integrity necessary for high-speed VLSI design. Second, an efficient balanced truncation realization algorithm is presented for interconnect model order reduction. This algorithm shows that there is no need to solve the whole Lyapunov equation for controllability and observability grammians before obtaining approximation to their predominant spaces, and a linear order reduction algorithm can be achieved by extending the O(n) Krylov Subspace Oblique Projection method. Finally, a unique LVS methodology is proposed for the verification of a quad-core microprocessor designed with a triple-well 90-nm CMOS technology. Due to the IP reuse, the standard LVS flow is incapable of handling the additional design complexity in verifying the LVS for the chip designed with multiple power domains. This proposed LVS strategy consists of two phases. The first phase involves verifying LVS at the block level as well as the full-chip level. The second phase aims at verifying the integrity of the multi-power-domain power grid. The proposed LVS methodology was successfully verified by real silicon.

Hardware implementation of VLSI mask verification algorithms

Hardware implementation of line-scan based mask verification algorithm

A Secure Scan Method for Crypto Chips

VLSI Design Automation Procedure to Optimize SSN Performance

A Fast OPC Algorithm for IC Layout Based on 1-D Cells after Optimization of Gap Distribution

A Fully Automated Large-Scale Addressable Test Chip Design with High Reliability

Implementation of High Performance Hardware Architecture of Face Recognition Algorithm Based on Local Binary Pattern on Fpga

VLSI Mask Optimization: From Shallow To Deep Learning

Hardware Implementation for Haze Removal With Adaptive Filtering

GPU-Accelerated Inverse Lithography Towards High Quality Curvy Mask Generation

Hardware Implementation for Real-Time Haze Removal.

Edge-sorter: A hardware sorting engine for area & power constrained edge computing devices

Implementation of an Efficient Defect Classification Method in Photomask Mass Production

Algorithms and Methodology in Physical Domain Optimization for High-Performance Vlsi Design

Performance verification and latency time evaluation of hardware image processing module for appearance inspection systems using FPGA

Lithography printability review: an application on advanced photomask production for enhancing mask yield and cycle time

Hardware Circuit for Edge Enhancing Arithmetic

Hardware Design and Implementation of SM3 Hash Algorithm for Financial IC Card

An adaptive edge enhancement algorithm and hardware implementation

A VLSI Array Processing Oriented Fast Fourier Transform Algorithm and Hardware Implementation

Cost-efficient Acceleration of Hardware Trojan Detection Through Fan-Out Cone Analysis and Weighted Random Pattern Technique