Abstract:We introduce a novel piezoelectric stepper motor featuring high compactness, rigidity, and any direction operability. Here, not only is the structure of high novelty but also the working principle very simple. The piezo stacks unit is sandwiched between two spring finger pieces, with almost equal clamping forces applied between the top of the piezo stacks' unit and the spring finger piece. Applying individual driving signals to each of the five piezo stack pairs, causing deformation one by one in the same direction, followed by simultaneous recovery in the reverse direction, enables movement of the frame part. The optimized clamping force of the piezoelectric stack units and spring fingers ensures maximum output force. The motor's operational capability at low threshold voltages, specifically 8 V for downward movement and 10 V for upward movement, confirmed its efficacy in both vertical and horizontal directions. The motor's operational capability at a low threshold voltage of 10 V confirmed its efficacy in both vertical and horizontal directions. At room temperature, step size ranges from 0.3 to 7.4 µm at 20 Hz frequency and varying driving voltage from 10 to 180 V. It has a maximum travel range of about 5 mm and can lift a maximum load of 220 g in an upward direction, so the maximum output force generated by this motor is 2.2 N. The compact and rigid design is capable of building an atomically resolved scanning probe microscope, and its working ability has the potential to use the cleavage of different types of samples in limited space environments, such as the small-bore superconducting magnet and low temperature.

A New Type of Linear Piezoelectric Stepper Motor

Piezoelectric-electrorheological Planar Stepper Motor

Characteristics of piezoelectric-electrorheologic linear stepper motor with high resolution

Multi-DOF and Sub-Micrometer Piezoelectric-Electrorheological Stepper Motor

A bio-inspired piezoelectric motor with simple structured asymmetric stator

A rigid and compact piezoelectric motor with high output efficiency

Design and Experimental Study of Piezoelectric Ceramics Linear Motor

A novel high energy density single-phase linear piezoelectric motor: design and experiment

A New Hybrid Stepper Motor, Compliant Piezoelectric Micro-Tweezer for Extended Stroke

Vibration Analysis of Stepping Piezoelectric Micro-Motor Using Wiggle Mode

A planar piezoelectric motor of two dimensional XY motions driven by one cross-shaped piezoelectric unit: A new principle

A Study of Linear Piezoelectric Inchworm Motor Using Position Gripped Ultrasonic Vibrator

Recession in a Linear Stepper Motor Based on Piezoelectric Actuator and Electrorheological Clampers

A Novel Piezoelectric Micro-Motor Using Multilayer Co-Firing Piezoelectric Ceramics

Investigation On Piezoelectric Ceramics With High D(33), D(31), For A New Type Of Rotational Stepper Motor

Improvement on the Structure Design of a Kind of Linear Piezoelectric Motor with Flexible Drive-Foot

Research and application on piezoelectric ceramic component with shear modes for micro-ultrasonic motor

Research on novel inertial linear ultrasonic piezoelectric motor

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

A Linear Piezoelectric Inchworm Motor Using Ultrasonic Clamping Vibrator

Development of an Ultrasonic Linear Motor with Ultra-Positioning Capability and Four Driving Feet