Abstract:The electricity market from renewable energies is strongly driven by the pursuit of high energy conversion efficiency, which at present represents the most effective pathway to achieve substantial cost reductions. Silicon (Si) have been dominating the photovoltaic industry for decades, while the conversion efficiencies of Si single-junction solar cells are practically limited to around 27%, and intrinsically constrained to 29.4%. To tackle this long-term bottleneck, it is necessary to develop novel technologies and transfer them into industrial production. This paper commences with a review concentrating on two critical concepts enabling high-efficiency Si-based solar cells: passivating contacts and tandem technologies. Since the gradual evolution from full area Al back surface field cells to passivated emitter and rear contact cells, passivating contacts are considered as an essential concept to circumvent the recombination losses caused by the contacts. The theoretical background of the three prominent technologies for passivating contacts and their application prospects to solar cells are described in detail. The fundamental limit of single junction Si solar cells is attainable with the introduction of passivating contacts. To obtain conversion efficiencies greater than 30%, upgrading Si with a high-bandgap tandem partner is a promising approach to improve the utilization of the solar spectrum, having the potential to produce efficiency surpassing the single junction Shockley–Queisser limit. Si is proven to be an ideal bottom cells material in tandem architectures due to its appropriate bandgap for the lower sub-cell and the advantage of compatibility with existing production lines, the technologies for crystalline Si as bottom-cell are already quite mature with a gigawatt scale. The two widely considered ideal options for the top-cell, i.e., III/V and perovskites, are summarized, respectively. Building on these two concepts, a clear technology route is provided to maximize energy conversion efficiency by integration of passivating contacts into Si based tandem solar cells. According to this discussion, guidelines for further developments of Si photovoltaics emerge clearly, proving that Si will continue to maintain its irreplaceable position in photovoltaics in the long term.

Low Resistivity Efficient Passivated Silicon Solar Cells

25-Percent Efficient Low-Resistivity Silicon Concentrator Solar-Cells

Application of SiO2 Passivation Technique in Mass Production of Silicon Solar Cells

23.6% Efficient Low Resistivity Silicon Concentrator Solar Cell

Industrial Silicon Solar Cells Applying the Passivated Emitter and Rear Cell (PERC) Concept—A Review

Numerical study of mono-crystalline silicon solar cells with passivated emitter and rear contact configuration for the efficiency beyond 24% based on mass production technology

Towards High-Efficiency Industrial P-Type Mono-Like Si PERC Solar Cells

Characterization of 23-percent efficient silicon solar cells

High Performance Inverted RbCsFAPbI3 Perovskite Solar Cells Based on Interface Engineering and Defects Passivation.

High-Efficiency Silicon Inverted Pyramid-Based Passivated Emitter and Rear Cells

Passivated Emitter and Rear Cell Silicon Solar Cells with a Front Polysilicon Passivating Contacted Selective Emitter

Conductive Passivator for Efficient Monolithic Perovskite/Silicon Tandem Solar Cell on Commercially Textured Silicon

Passivating contacts for high-efficiency silicon-based solar cells: From single-junction to tandem architecture

Electrical Performance, Loss Analysis, and Efficiency Potential of Industrial‐Type PERC, TOPCon, and SHJ Solar Cells: A Comparative Study

22.13% Efficient Industrial P-Type Mono Perc Solar Cell

Ultrathin Self-Assembled Monolayer for Effective Silicon Solar Cell Passivation

Efficient Silicon Solar Cells with Aluminum‐Doped Zinc Oxide‐Based Passivating Contact

Recent advancements in poly-Si/SiOx passivating contacts for high-efficiency silicon solar cells: Technology review and perspectives

Very High Efficiency Silicon Solar Cells-Science and Technology

Improved Surface Passivation by Wet Texturing, Ozone‐Based Cleaning, and Plasma‐Enhanced Chemical Vapor Deposition Processes for High‐Efficiency Silicon Heterojunction Solar Cells

High-efficiency Multicrystalline Silicon Solar Cells using Standard High-temperature, Float-zoned Cell Processing