Abstract:The purposes of this paper are sixfold. First, any micromechanics model for predicting elastic property (stiffness) of a composite is applicable to a reasonable prediction of a composite strength, provided that the homogenized internal stresses in the matrix are converted into true values. The conversion for all of the stress components free of biaxially transverse loads is presented in the paper. Second, the predictability of 12 well-known micromechanics models for stiffness and strength of a unidirectional composite is assessed against the measured data of all of the nine unidirectional composites used in three world-wide failure exercises. An accuracy ranking is made accordingly. Third, it is demonstrated that the smallest fiber volume in a representative volume element for a finite element approach plays a more dominant role than other issues such as a random fiber array to achieve the highest simulation accuracy. This feature has been largely ignored in the current literature. Fourth, a consistency of a micromechanics model in calculating the internal stresses in the fiber and matrix of the composite is an issue that should be taken into account. Among the 12 models considered, only Bridging Model is consistent. A non-consistency implies that a full three-dimensional approach should be used to predict an effective property of the composite even though it is subjected to a uniaxial load. Fifth, an effective method to detect an interface debonding between the fiber and matrix subjected to an arbitrary load is presented in the paper. Only a transverse tensile strength of the composite, in addition to the original fiber and matrix properties, is needed. Whereas essentially any load can cause the interface to debond earlier before a composite failure, only a transverse tensile load carrying capacity of the composite is influenced significantly by the debonding. Specifically, an interface debonding has insignificant effect on a shear strength of the composite. Sixth, a fiber misalignment-induced kink band failure is analyzed by virtue of the original fiber and matrix properties, and a longitudinal compressive strength is predicted micromechanically.

Micromechanical modeling of mechanical properties of composite materials

Micromechanical Simulation on Strength and Ductility of Two Kinds of Al-based Nanostructural Materials

Simulation of the mechanical properties of fibrous composites by the bridging micromechanics model

Transverse Strength Prediction of Composite Materials Via Micromechanics Model

Elastic Modulus Prediction of Filament Winding Composites Based on Micromechanical Model

A Micromechanical Model for Interpenetrating Multiphase Composites

Micromechanical Modeling of the Viscoelastic–viscoplastic Response of Fiber-Reinforced Composites

A Micromechanics Based Elasto-Plastic Damage Model for Unidirectional Composites under Off-Axis Tensile Loads.

A Unified Micromechanical Model for the Mechanical Properties of Two Constituent Composite Materials. Part IV: Rubber-Elastic Behavior

A Multiscale Model for Predicting Mechanical Properties of Polymer Composites

Micromechanical Modeling of Local Field Distribution for a Planar Composite under Plastic Deformation

On micromechanics approach to stiffness and strength of unidirectional composites

A Stochastic Micromechanical Model for Multiphase Composites Containing Spherical Inhomogeneities

Analytical Micromechanics Models for Elastoplastic Behavior of Long Fibrous Composites: A Critical Review and Comparative Study

Damage micromechanical analysis of metal matrix composites

A simplified micromechanical model for predicting effective mechanical behaviors of continuous bidirectional-fiber-reinforced composites

Micromechanics constitutive model for predicting the stress–strain relations of particle toughened bulk metallic glass matrix composites

Micromechanical modeling of fatigue strength of unidirectional fibrous composites

Micromechanical Modeling of Viscoplastic Behavior of Laminated Polymer Composites with Thermal Residual Stress Effect

Multiscale Thermomechanical Modeling of Short Fiber-Reinforced Composites

Micromechanical modeling of unidirectional composites with random fiber and interphase thickness distributions