Abstract:Synergistic micro-alloying with Ti–Zr effectively enhances the mechanical properties of cast Al–Cu–Mn alloys. In this study, the connection between microstructure evolution and mechanical properties of Al–Cu–Mn alloy through gravity casting was investigated with synergistic addition of Ti and Zr elements, aiming to promote the strength and toughness of Al–Cu–Mn alloy. The results showed that synergistic addition of 0.15 wt%Ti and 0.2 wt%Zr refined grains owing to the constitutional supercooling caused by Ti and Zr. A large number of Al 3 (Ti,Zr)-L1 2 dispersoids with core–shell structure uniformly precipitated within the grains during the solution process. The Al 3 (Ti,Zr) dispersoids served as heterogeneous nucleation sites for θ ′(Al 2 Cu) precipitates during aging. As confirmed by quantitative analysis, Ti–Zr-modified alloys (with 0.15 wt%Ti and 0.2 wt%Zr) exhibited finer and more densely populated θ ′ precipitates than unmodified alloys, resulting in superior mechanical properties. In the peak-aged state, the ultimate tensile strength, yield strength and elongation of Ti–Zr-modified alloy were 530.5 MPa, 462.8 MPa and 7.6%, respectively, which were mainly ascribed to grain boundaries strengthening, solution strengthening and precipitation strengthening. This work is expected to provide reliable theoretical guidance for the successful preparation of high-strength and high toughness Ti–Zr-modified aluminum alloys.

Mechanical properties and microstructures of Al-Mg-Li-Zr alloys-containing silver

Influence of Ag on microstructure, mechanical properties and tribological properties of as-cast Al-33Zn-2Cu high-zinc aluminum alloy

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Effects of Cr and Zr additions on the microstructure and properties of Cu-6wt.% Ag alloys

Effects of Zr and Mg alloying on microstructure and properties of Cu-Cr-Si alloys

Effect of trace silver addition on microstructure and properties of Cu-0.45Cr-0.1Zr alloy

Investigating the role of Cu, Zr and V on the evolution of microstructure and properties of Al-Si-Mg cast alloys

Microstructure, Mechanical Properties, and Corrosion Behavior of Al-4.0Cu-1.1Li-0.5Mg-xAg Alloys

Enhanced age-hardening response and mechanical properties of the Mg-Gd-Y-Zn-Zr alloy by trace Ag addition

Effects of micro-alloying Ag on microstructure, mechanical properties and corrosion behavior of extruded Mg-2Zn-0.2Ca-xAg alloys

Influence of Li addition on mechanical property and aging precipitation behavior of Al-3.5Cu-1.5Mg alloy

Effect of Al on Microstructure and Mechanical Properties of Mg-10Li-3Zn-1Y Alloys

The effect of Ag on the tensile strength and fracture toughness of novel Al-Mg-Zn alloys

Effects of addition of Er and Zr on microstructure and mechanical properties of Al–Cu–Mn–Si–Mg alloy

Sn-Sc microalloying-induced property improvement and micromechanisms of an Al-Mg-Si alloy

Microstructure, Mechanical Properties and Corrosion Behaviors of Al–Li–Cu–Mg–Ag–Zn Alloys

Effect of Al addition on the grain refinement and mechanical properties of as-cast Mg–5Y–4Sm alloys

Effects of Al Concentration on Microstructure and Mechanical Properties of Mg-xAl-1Zn-1Si Alloy

Effect of Minor Addition of Zirconium on Microstructure and Mechanical Property of Al-12Mg Alloy

Microstructure Evolution and Strengthening Mechanisms of Cast Al–Cu–Mn Alloy via Ti–Zr-Synergistic Micro-alloying

Effect of the Solid Solution and Aging Treatment on the Mechanical Properties and Microstructure of a Novel Al-Mg-Si Alloy