Abstract:A novel carbonaceous SiC/mullite composite aerogel is derived from catechol-formaldehyde/silica/alumina hybrid aerogel (CF/SiO2/AlOOH) via polymer-derived ceramics route (PDCR). The effects of the reactants concentrations on the physicochemical properties of the carbonaceous SiO2/Al2O3 aerogel and SiC/mullite aerogel are investigated. The mechanism of the textural and structural evolution for the novel carbonaceous SiC/mullite is further discussed based on the experimental results. Smaller reactants concentration is favorable to formation of mullite. Reactants concentration of 25% is selected as the optimal condition in considering of the mullite formation and bulk densities of the preceramic aerogels. Spherical large silica particles are also produced during heat treatment, and amorphous silica is remained after this reaction. With further heat treatment at 1400°C, silicon carbide and mullite coexist in the aerogel matrix. The mullite addition decreases the temperature of SiC formation, when compared with the conventional methods. However, after heat treatment at 1450°C, the amount of mullite begins to decrease due to the further reaction between carbon and mullite, forming more silicon carbide and alumina. The carbonaceous SiC/mullite can be transferred to SiC/mullite binary aerogel after carbon combustion under air atmosphere. The carbonaceous SiC/mullite has a composition of SiC (31%), mullite (19.1%), SiO2 (14.4%), and carbon (35%). It also possesses a 6.531nm average pore diameter, high surface area (69.61m2/g), and BJH desorption pore volume (0.1744cm3/g). The oxidation resistance of the carbonaceous SiC/mullite is improved for 85°C when compared with the carbon based aerogel.

Nanostructural Investigation of Silica Aerogels

Springback effect and structural features during the drying of silica aerogels tracked by in-situ synchrotron X-ray scattering

Fractal Structure in Silica and Composites Aerogels

Small Angle Neutron Scattering of Aerogels: Simulations and Experiments

Flexible and Compressible Nanostructure-Assembled Aramid Nanofiber/Silica Composites Aerogel

Silica aerogel; synthesis, properties and characterization

Multiscale Assembly of Superinsulating Silica Aerogels Within Silylated Nanocellulosic Scaffolds: Improved Mechanical Properties Promoted by Nanoscale Chemical Compatibilization

Cluster Structure of Silica Aerogel Investigated by Laser Ablation

Structural and Magnetic Characterization of Co and Ni Silicate Hydroxides in Bulk and in Nanostructures Within Silica Aerogels

Effects of Surfactants on the Synthesis of Silica Aerogels Prepared by Ambient Pressure Drying

Robust Silica–Agarose Composite Aerogels with Interpenetrating Network Structure by in Situ Sol–Gel Process

STUDY ON STRUCTURE CHARACTERISTICS OF RESORCINOLFORMALDEHYDE AND Ni(OH)_2 COMPOSITE AEROGELS

The roles of density and oxygen concentration on the structure of silica aerogel: Insight from an atomistic study

Raman Spectroscopy and Structural Characteristics of Copper-Ion-Doped Silica Sol, Gel, and Aerogel

Self-reinforcement of Light, Temperature-Resistant Silica Nanofibrous Aerogels with Tunable Mechanical Properties

Nanofibrous Aerogel Bulk Assembled by Crosslinked SiC/SiOx Core-Shell Nanofibers with Multifunctionality and Temperature-Invariant Hyperelasticity.

An Updated Overview of Silica Aerogel-Based Nanomaterials

In-situ synthesis and textural evolution of the novel carbonaceous SiC/mullite aerogel via polymer-derived ceramics route

A 3-D Numerical Heat Transfer Model for Silica Aerogels Based on the Porous Secondary Nanoparticle Aggregate Structure

Preparation of Silica Aerogels Via Ambient Pressure Drying

Synthesis and characterization of SiO2-Al2O3 composite aerogel using inorganic aluminum salt as raw material