Abstract:The ultra-thin multilayer ceramics capacitors (MLCCs) with layer thickness less than 1 tm are in urgent demand due to the rapid development of modern electronic industries. However, the preparation of the dielectric materials with the desirable grain size <150 nm is a huge challenge. In this work, the ultra-fine BaTiO3 (BT) powders (<120 nm) prepared via solid-state reaction method, hydrothermal method and hydrothermal method following a heat treatment (850 degrees C) are selected to prepare the nano-crystalline non-reducible BT-based ceramics, respectively. The effect of the synthesis methods on the microstructure, electric performance and the reliability of the BT-based ceramics are studied. The results of the Raman, XPS and FT-IR spectroscopy demonstrate that a large number of internal stresses and point defects (hydroxyl/proton defects, Ba vacancies) are existed in the hydrothermal powders and can be eliminated to some extent by a proper heat treatment. Unfortunately, plenty of nano-pores (10-20 nm) are observed in the hydrothermal powders, which cannot be eliminated via the heat treatment or sintering process totally. As a result, the BT-based ceramic prepared by the solid-state powders has an absolute advantage in accelerating aging failure performance, compared to that prepared hydrothermal powders. The TSDC results indicate that the ceramic prepared by the solid-state powders has a lower oxygen vacancy concentration and a higher activation energy. Furthermore, a scaling analysis based on a RC equivalent model identifies the longer oxygen vacancy diffusion time for the ceramic prepared by the solid-state powders. All these features demonstrate that the solid-state ultra-fine BT powders are a promising candidate for the fabrication of the ultra-thin layer MLCCs. (C) 2020 Elsevier B.V. All rights reserved.

Study on SrTiO3 monolithic grain boundary layer capacitors

The effects of solid-state and hydrothermal synthesis methods of BaTiO3 on the reliability of multilayer ceramic capacitors

A study of microstructure and properties of BaTiO3 from solid‐state and hydrothermal synthesis on MLCCs performance

Core-shell TiN@SrTiO3 Structure for Grain Boundary Barrier Layer Capacitor

Microstructure and Dielectric Characteristics of Nb2O5 Doped BaTiO3-Bi(Znl/2Til/2)O3 Ceramics for Capacitor Applications

Improving Energy Storage Performance of Barium Titanate-Based Ceramics by Doping MnO2

Development of Yttrium-Doped BaTiO3 for Next-Generation Multilayer Ceramic Capacitors

Grain Size Engineered High‐performance Nanograined BaTiO3‐based Ceramics: Experimental and Numerical Prediction

Electrical And Reliability Characteristics Of Mn-Doped Nano Batio3-Based Ceramics For Ultrathin Multilayer Ceramic Capacitor Application

Simultaneous Enhancement of Dielectric Properties and Temperature Stability in BaTiO3‐based Ceramics Enabling X8R Multilayer Ceramic Capacitor

Grain size engineered high‐performance nanograined BaTiO 3 ‐based ceramics: Experimental and numerical prediction

Preparation of Nano BaTiO3-Based Dielectric Ceramics by Different Sintering Methods

Effect of Grain Size on Dielectric Properties and Reliability for Ultra-Thin MLCCs

Excellent permittivity-temperature stability and reliability performance of ultra-thin Ba<sub>0.97</sub>Ca<sub>0.03</sub>TiO<sub>3</sub>-based MLCCs

Microstructure and Dielectric Properties of Gradient Composite BaxSr1−xTiO3 Multilayer Ceramic Capacitors

High Reliable Non-Reducible Ultra-Fine BaTiO3-based Ceramics Fabricated Via Solid-State Method

Significantly Enhanced Dielectric Properties of BaTiO3-based Ceramics Via Synergetic Grain Size and Defect Engineering

Grain Boundary Effect on Dielectric Properties of (nd0.5nb0.5) Ti1-O2 Ceramicsceamics

Microstructure Evolution and Dielectric Properties of Ultrafine Grained Batio3-Based Ceramics by Two-Step Sintering

Achieving high adhesion and low‐temperature sintering for multilayer ceramic capacitors by tunning the structure of SrO‐ZnO‐B2O3‐SiO2 glass

Study on Y5P type surface layer semi-conducting ceramic capacitors