Abstract:Background: Ultrasonic motors (USM) are based on the concept of driving the rotor by a mechanical vibration excited on the stator via piezoelectric effect. USM exhibit merits such as simple structure, quick response, quiet operation, self-locking when power off, nonelectromagnetic radiation and higher position accuracy.Principal Findings: A cylindrical type traveling wave ultrasonic motor using cantilever type composite transducer was proposed in this paper. There are two cantilevers on the outside surface of cylinder, four longitudinal PZT ceramics are set between the cantilevers, and four bending PZT ceramics are set on each outside surface of cantilevers. Two degenerate flexural vibration modes spatially and temporally orthogonal to each other in the cylinder are excited by the composite transducer. In this new design, a single transducer can excite a flexural traveling wave in the cylinder. Thus, elliptical motions are achieved on the teeth. The actuating mechanism of proposed motor was analyzed. The stator was designed with FEM. The two vibration modes of stator were degenerated. Transient analysis was developed to gain the vibration characteristic of stator, and results indicate the motion trajectories of nodes on the teeth are nearly ellipses.Conclusions: The study results verify the feasibility of the proposed design. The wave excited in the cylinder isn't an ideal traveling wave, and the vibration amplitudes are inconsistent. The distortion of traveling wave is generated by the deformation of bending vibration mode of cylinder, which is caused by the coupling effect between the cylinder and transducer. Analysis results also prove that the objective motions of nodes on the teeth are three-dimensional vibrations. But, the vibration in axial direction is minute compared with the vibrations in circumferential and radial direction. The results of this paper can guide the development of this new type of motor.

Study on Piezoelectric Ceramic/metal Composite Thin Plate of Driving Stator for Travelling-Wave Motor

Study on the Vibration Couplings of a Traveling Wave Piezoelectric Stator Excited by a Longitudinal and Bending Hybrid Transducer

Study on the Wave Deformation of A Traveling Wave Piezoelectric Stator Using Composite Transducer

Harmonic Wave Propagation of Ultrasonic Arc Stators

Analytical Solution on the Non-Linear Vibration of a Traveling Wave Ultrasonic Motor

A Cylindrical Traveling Wave Ultrasonic Motor Using a Circumferential Composite Transducer

Research and application on piezoelectric ceramic component with shear modes for micro-ultrasonic motor

Wave propagations of curvilinear motors driven by partially laminated piezoelectric actuators

Dynamic Analysis and Performance Simulation of a Traveling Wave Type and Rod Shape Ultrasonic Motor

Optimization research of stator with two degree-of-freedom traveling-wave spherical ultrasonic motor

Study on piezoelectric standing wave rotary motor

Design and Dynamic Simulation of a Novel Traveling Wave Linear Ultrasonic Motor

Working Principle and Design of a Double Cylinders Type Traveling Wave Ultrasonic Motor Using Composite Transducer

A New Traveling Wave Ultrasonic Motor Using Thick Ring Stator with Nested PZT Excitation

Standing Wave-Type Bi-Directional Linear Moving Ultrasonic Motor Using Plates and Weak Links

Design and Analysis of A Cylindrical Traveling Wave Ultrasonic Motor Using Composite Transducer

Dynamic Analysis of Composite Stator of Ultrasonic Motor Based on Substructure Interface Loading Theory

A Rotary Traveling Wave Ultrasonic Motor with Four Groups of Nested PZT Ceramics: Design and Performance Evaluation

Working principle and design of a ring type traveling wave ultrasonic motor using composite transducer

A new traveling wave ultrasonic motor using thick ring stator with nested PZT excitation.

The design and test of a new kind of piezoelectric motor based on standing wave and multilayer