Abstract:The composite catalyst composed of sulfuric acid and alkyl imidazole-based acidic ionic liquid was used to replace pure sulfuric acid as the catalyst for the synthesis of trioxane. 1-ethyl-3-methylimidazolium hydrosulfate ([EMIM][HSO4]), 1-butyl-3-methylimidazolium hydrosulfate ([BMIM][HSO4]), and 1-hexyl-3-methylimidazole hydrosulfate ([HMIM][HSO4]) were chosen to form composite catalysts with sulfuric acid. The effects of ionic liquid types, formaldehyde concentration (35 ~ 55 wt%), and temperature (353 ~ 368 K) on the reaction were studied. When H2SO4 / [EMIM][HSO4] was used as catalyst with a dosage of 0.6 mol/kg of formaldehyde solution, the optimal catalytic performance was obtained at 373 K with the 50 wt% formaldehyde solution as initial reactant. Compared to that with pure H2SO4 as the catalyst, the trioxane concentration in the reaction system was sharply increased with an increment of 17% by the synergy of ionic liquid [EMIM][HSO4]. The equilibrium constant was increased from 3.08 × 10−5 to 4.19 × 10−5 by the addition of [EMIM][HSO4]. The reaction was intensified by the inhibition of reverse reaction. It indicates that the addition of [EMIM][HSO4] has complicated effects on the reaction. The research results provide a deep understand for the catalytic performance of mineral acid/ionic liquid composite catalysts.

Effects of reaction conditions and adding inert substances on the synthesis of trioxane

Synthesis of 4-Hydroxy-3-methoxyphenylacetonitrile

Effect of Oxygen Volume Fraction in Feed Stream on p-Xylene Oxidation Reactor

An Improved Synthesis of 2,2-Diethoxypropane by Using Triethyl Orthofomate

Effects of Process Conditions on Products Distribution of Cyclohexane Non-Catalytic Oxidation in Microcapillary

Effect of ambient factors over spinel CuMn2O4 for toluene catalytic ozonation: Enhancement of the synergy and the generation of ROS

Green Route to Synthesize Oxime

Catalytic Ozonation of Toluene over Spinel Cumn2o4: Influencing Factors, Reaction Mechanism and Pathways

Effects of reaction progress in microchannel on microstructure of Cu-Zn catalyst

Reaction kinetics of trioxane synthesis from formaldehyde catalyzed by sulfuric acid/ionic liquid

Reaction engineering analysis for trioxane synthesis reactors

Carbonylation of Formaldehyde with Carbon Monoxide over Cation-Exchange Resin Catalysts

Study on the Synthesis of Triazine Oligmer Charring Agent

Links Between Reaction Intermediates, Reactivity, and Reaction Conditions in Oxygenates Formation During Fischer-Tropsch Synthesis

Optimization of Conditions for Preparation of ZSM-5@silicalite-1 Core–shell Catalysts Via Hydrothermal Synthesis

A new catalyst mixture for synthesis of 1,3, 5‐trioxane

The Effect of the Different Reaction Conditions on Synthesizing Iso-Amyl Benzoate

Synthesis of Acetone Oxime Through Acetone Ammoximation over TS-1

The Effect of the Different Reaction Conditions on Synthesizing Iso-Propyl Chloroacetate

Simulation and Optimization of a Coupled Reactor/column System for Trioxane Synthesis

Simulation calculation of a distillation process for separating water-formaldehyde-trioxane mixture