Abstract:A programme was developed by which the intrinsic rate equations (YY) can be determined separating mass and heat transfer resistance from the integral data in the complex reaction network. The steam-methane reforming process was studied using this programme in an integral flow reactor (60ID x 1,800) over a nickel catalyst at temperatures varying from 674 K to 1160 K, pressure raning from 1.2 to 25.5 bar and S/C in the feed between 1.44 and 4.50. The reactor was considered to be a fixed-bed model with axial pseudo-one dimensional temperature profile. The intrinsic rate equations for steam-methane reforming (RF) and shift (SF) reaction were determined by the calculation of mass and heat balances considering interphase and intraphase diffusions using a numerical solution of the non-linear two-point boundary value problem. Assuming the competitive production model of CO and CO2, in the hybrid expression of the Langmuir-Hinshelwood expression and the power law expression, the following values were derived for the activation energies (E) and the effectiveness factors (η); ER = 106.87 kJ/g-mol, ES = 54.531 kJ/g-mol, ηR, ηS = 0.05–0.065. The apparent rate equations (NN) estimated without separating mass and heat transfer influences were also obtained. The relation of RF and SF rate constants in each case was as follows: in YY case, 700 K < t < 900 K: kR < kS, 900 K < t < 1185 K: kS < kR, while in NN case, 700 K < t < 1185 K: kR < kS. In the design simulation the excess ratio of the catalyst volume required with NN to that with YY increases with lower pressure, lower SVo, higher S/C and higher inlet temperature under the same heat flux profile. For example at P = 2.0 bar, SVo = 5,000 h–1, S/C = 4.5 and Tin = 823 K, the excess ratio was 11.9%. This deviation could be mainly ascribed to the difference of activation energy between YY and NN.

Reaction engineering analysis for trioxane synthesis reactors

Cstr Model for P-Xylene Oxidation Reactor

THE MATHEMATICAL SIMULATION OF AN ETHOXYLATION TUBULAR REACTOR

Deactivation Kinetic Study on Vapor Phase Beckmann Rearrangement of Cyclohexanone Oxime and Design of the Multi-Layer Inclined Channel Bionic Reactor

Modeling and Simulation Research onm-Xylene Oxidation Reactor

Modeling of P-Xyoene Oxidation Reactor-Condenser

Modeling and Analysis of New Reactor Concepts for Poly(ethylene Terephthalate) Esterification Process

Simulation and Optimization of a Coupled Reactor/column System for Trioxane Synthesis

Effects of reaction conditions and adding inert substances on the synthesis of trioxane

Reactor Network Synthesis for P-Xylene Oxidation Process

Nitration of o -xylene in the microreactor: Reaction kinetics and process intensification

Simulation and Analysis of Fixed-Bed Reactor for Hydrochlorination of Acetylene

Modeling of a Pilot-Scale Trickle Bed Reactor for the Catalytic Oxidation of Phenol

Novel Reactor for Exothermic Heterogeneous Reaction Systems: Intensification of Mass and Heat Transfer and Application to Vegetable Oil Epoxidation

Determination and discussion of apparent reaction kinetics of liquid diacyl peroxide synthesis in a microreactor

Reaction Kinetics of Cyclohexanone Ammoximation over TS-1 Catalyst in a Microreactor

Numerical Simulation of Thermal Performance for the Reaction Tubes in a Miniaturized Methanol Synthesis Reactor

High-throughput parallel reactor system for propylene oxidation catalyst investigation

Reaction kinetics of trioxane synthesis from formaldehyde catalyzed by sulfuric acid/ionic liquid

Numerical Modeling of a Microreactor for the Synthesis of Adipic Acid Via KA Oil Oxidation

INTRINSIC KINETICS AND DESIGN SIMULATION IN A COMPLEX REACTION NETWORK; STEAM-METHANE REFORMING