Abstract:Direct propylene epoxidation with H2 and O2, an attractive process to produce propylene oxide (PO), has a potential explosion danger due to the coexistence of flammable gases (i.e., C3H6 and H2) and oxidizer (i.e., O2). The unknown explosion limits of the multi-component feed gas mixture make it difficult to optimize the reaction process under safe operation conditions. In this work, a distribution method is proposed and verified to be effective by comparing estimated and experimental explosion limits of more than 200 kinds of flammable gas mixture. Then, it is employed to estimate the explosion limits of the feed gas mixture, some results of which are also validated by the classic Le Chatelier's Rule and flammable resistance method. Based on the estimated explosion limits, process optimization is carried out using commercially high and inherently safe reactant concentrations to enhance reaction performance. The promising results are directly obtained through the interface called gOPT in gPROMS only by using a simple, easy-constructed and mature packed-bed reactor, such as the PO yield of 13.3%, PO selectivity of 85.1% and outlet PO fraction of 1.8%. These results can be rationalized by in-depth analyses and discussion about the effects of the decision variables on the operation safety and reaction performance. The insights revealed here could shed new light on the process development of the PO production based on the estimation of the explosion limits of the multi-component feed gas mixture containing flammable gases, inert gas and O2, followed by process optimization.

Study on Reaction Mechanism and Process Safety for Epoxidation

Epoxidation of propylene to propylene oxide catalyzed by μ-oxo-bismetalloporphyrins

On the Nature of Reaction-Controlled Phase Transfer Catalysts for Epoxidation of Olefin: A 31 P NMR Investigation

Development of a Purely Isolable (Dimorpholino)triazine-Based Reagent for the Epoxidation of Alkenes

Mass Transfer and Reaction Kinetics of Soybean Oil Epoxidation in a Formic Acid‐autocatalyzed Reaction System

Rapid Epoxidation of Α,β-Unsaturated Olefin in Microdroplets Without Any Catalysts

Study on Reaction Mechanism and Intrinsic Kinetics of Epoxidation of Propylene Catalyzed by TS-1 in Alcohols

Kinetic Studies and Reaction Network in the Epoxidation of Styrene Catalyzed by the Temperature-Controlled Phase-Transfer Catalyst [(C18H37)2(CH3)2N ]7[PW11O39]

A spectroscopic study on the reaction-controlled phase transfer catalyst in the epoxidation of cyclohexene

Efficient Organocatalytic Synthesis of Styrene Oxide from Styrene and Its Kinetic Study in a Continuous-Flow Microreaction System

Mechanistic Insights into Propene Epoxidation with O2–H2O Mixture on Au7/α-Al2O3: A Hydroproxyl Pathway from Ab Initio Molecular Dynamics Simulations

Propene Epoxidation with Molecular Oxygen: Advancements from Nanoparticle to Single‐atom Catalysts

Explosion Limits Estimation and Process Optimization of Direct Propylene Epoxidation with H2 and O2

Study on Ag-Mo Catalyst for Direct Vapor-Phase Epoxidation of Propylene by Molecular Oxygen

Exploration research on high selectivity of propylene epoxidation over TS-1 catalyst

Study on the Epoxidation of Olefins with H2O2 Catalyzed by Biquaternary Ammonium Phosphotungstic Acid

Transition States of Epoxidations: Diradical Character, Spiro Geometries, Transition State Flexibility, and the Origins of Stereoselectivity

Studies on epoxidation of styrene catalyzed by new molybdenum(Ⅵ) complexes

Catalytic Epoxidations with Pyridinebis(oxazoline)–Methyltrioxorhenium Complexes and Nitrogen‐Containing Catalyst Systems

Palladium-Catalyzed Epoxidation of Olefins Using Electrophiles as Oxidizing Agents

Aliphatic Olefin Epoxidation with Hydrogen Peroxide Catalyzed by an Integrated Mn/TS-1/N System