Abstract:Hybrid quantum dot solar cell (HQDSC) based on solution-processed blends of poly(3-hexylthiophene) (P3HT) with PbS quantum dots (QDs) is a potential candidate toward practical use for its low material cost and simple fabrication process. However, P3HT is highly incompatible with oleic acid (OA)-capped PbS QDs (OA-PbS QDs) due to strong phase separation, giving poor quality in the desired bi-continuous networks morphology and thus leading to inefficient charge collection. Here, for the first time, a block copolymer of P3HT with polystyrene (P3HT-b-PS) was confirmed to improve the miscibility between the polymers and OA-PbS QDs, leading to the formation of a desirable bi-continuous network morphology, as predicted by us via dissipative dynamic simulations previously. The bi-continuous network morphology for charge transport is an ideal morphology in bulk heterojunction solar cells. For the active layer, using the block copolymer P3HT-b-PS as the donor and PbS QDs as the acceptor at the weight ratio of 1:20, the power conversion efficiency (PCE) of HQDSC was found to be 4.18%, which is higher than P3HT and PbS QDs (3.66%) having the same weight ratio even though the content of the P3HT component in P3HT-b-PS was 28% less than that of homo-polymer of P3HT. The formation of the desired morphology for electron and hole collections of the device with the block copolymer was confirmed via scanning electron microscopy. Further, the addition of P3HT into the blend of the block copolymer with OA-PbS QDs still retains the desired morphology. Therefore, further improvement of PCE was made by taking the blend of P3HT and P3HT-b-PS at the weight ratio of 0.7:0.3 as the donor, thus achieving the PCE of 4.91%, which is better than that of P3HT alone by 1.25% and P3HT-b-PS alone by 0.73%. Thus, this methodology could be applicable for hybrid solar cells with a low bandgap molecular or polymeric material as the donor.

Hybrid Solar Cell Based on Polythiophene and Gan Nanoparticles Composite

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

Hybrid Nonfused Electron Acceptors with Perylene Diimide Pendants for Organic Solar Cells

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Hybrid Solar Cells Based on P3ht and Si@Mwcnt Nanocomposite

Hybrid Bulk Heterojunction Solar Cells Based on Poly (3-Hexylthiophene) and Z907-modified ZnO Nanorods

Silicon-nanocrystal-incorporated Ternary Hybrid Solar Cells

Integration of Planar and Bulk Heterojunctions in Polymer/nanocrystal Hybrid Photovoltaic Cells

Hybrid poly (3-hexylthiophene)/titanium dioxide nanorods material for solar cell applications

Hybrid Photovoltaic Cells Based on Zno/Sb2s3/P3ht Heterojunctions

GaAs nanowire/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) hybrid solar cells

Self-Assembled Amphiphilic Block Copolymers/Cdte Nanocrystals for Efficient Aqueous-Processed Hybrid Solar Cells

Pbse Quantum Dot Films with Enhanced Electron Mobility Employed in Hybrid Polymer/Nanocrystal Solar Cells

Amorphous Silicon Particles/Polyaniline Composites for Hybrid Photovoltaic Solar Cell: an Experimental Feasibility Study

Nanostructured Polymer Blends (P3HT/PMMA): Inorganic Titania Hybrid Photovoltaic Devices

Hybrid Heterojunction and Solid‐State Photoelectrochemical Solar Cells

Vertically aligned ZnCdS nanowire arrays/P3HT heterojunctions for solar cell applications

Self-organized Phase Segregation Between Inorganic Nanocrystals and PC61BM for Hybrid High-Efficiency Bulk Heterojunction Photovoltaic Cells

Carbon nanotube as hole-selective contact for high-efficiency full-area GaAs hybrid heterojunction solar cells

Polymer-Quantum Dot Composite Hybrid Solar Cells With A Bi-Continuous Network Morphology Using The Block Copolymer Poly(3-Hexylthiophene)-B-Polystyrene Or Its Blend With Poly(3-Hexylthiophene) As A Donor

High efficiency hybrid solar cells using post-deposition ligand exchange by monothiols.