Abstract:The failure mechanism of plasma-facing components (PFCs) under extreme plasma conditions relevant for fusion reactor were investigated. Here, edge-localized mode (ELM)-like transient thermal shock irradiation experiments were performed on tungsten and molybdenum using compressed plasma flow, and combined with thermal-mechanical analysis by means of finite element simulations to discuss the grain structure evolution, cracking behavior and variations of hardness. When ELM-like thermal shock irradiation was sufficient to melt tungsten and molybdenum, submicron-sized cellular sub-grain structure created on their surface due to the high temperature gradient of the molten layer under the effect of the Bénard-Marangoni instability. Rapid directional solidification from the bottom of the molten layer to the surface induced the formation of columnar grains dominated by orientation. While the formation of cellular sub-grains increased hardness, the thermal effect of irradiation and the formation of columnar grains led to softening. The high thermal stress induced by the ELM-like thermal shock produced macro-cracks and micro-cracks on the surface of tungsten and only micro-cracks on the surface of molybdenum. Macro-cracks generated due to the intrinsic brittleness of tungsten. As a result of stress evolution, longitudinal macro-cracks extending perpendicular to the surface experienced transverse transformation within the material. Micro-cracks formed due to the embrittlement of the re-solidification zone, and their width increased with the melting depth. These results help to understand failure mechanisms in PFCs under extreme operation conditions which are valuable for developing future fusion reactors.

Experimental simulation of materials degradation of plasma-facing components using lasers

Experimental and Numerical Simulations of ELM-like Transient Damage Behaviors to Different Grade Tungsten and Tungsten Alloys

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

High Heat Flux Testing of B4C/Cu and SiC/Cu Functionally Graded Materials Simulated by Laser and Electron Beam

Nanostructure Evolution and Surface Modification of Tungsten Exposed to Low Energy, High Flux Deuterium Plasma

Monte Carlo/molecular Dynamics Simulation on Melting and Evaporating Processes of Material Due to Laser Irradiation

Recent Studies of Tungsten-Based Plasma-Facing Materials in the Linear Plasma Device STEP

Experimental and simulation studies on damage mechanisms of tungsten and molybdenum under compressed plasma flow irradiation

Surface Cracking of Tungsten-Vanadium Alloys under Transient Heat Loads

Thermal Damage of Tungsten-Armored Plasma-Facing Components under High Heat Flux Loads

High-velocity dust impacts in plasma facing materials: Insights from Molecular Dynamics Simulations

Damages on Pure Tungsten Irradiated by Compression Plasma Flows

Microstructural modification of highly porous resolidified tungsten in heat flux of 46.3 GW/m 2 and focused ion beam

Neutron Irradiation-Induced Recrystallization Simulation for Tungsten in Nuclear Fusion Device

A Numerical Study of Cracks Appearance on Tungsten Surface after High Intense Pulsed Ion Beam Irradiation

Surface Damage and Microstructure Evolution of Yttria Particle-Reinforced Tungsten Plate During Transient Laser Thermal Shock

Evolution of tungsten degradation under different cyclic ELM-like high heat flux plasma

Plasma and X-ray radiation-induced damage mechanisms in a tungsten heavy alloy

Review of Irradiation Damage Behavior of Tungsten Exposed to Plasma in Nuclear Fusion

Progress in Irradiation Damage of Tungsten and Tungsten Alloys Under Different Irradiation Particles

Multi-physics modeling of the long-term evolution of helium plasma exposed surfaces