Abstract:This paper presents the analysis and design of broadband balance-compensated transformer baluns, suitable for silicon-based millimeter-wave (mm-wave) circuits requiring broadband high-quality balanced-unbalanced conversion. By introducing a mode-dependent lumped-element transformer model, a general center-tap-based balance-compensation method is proposed for transformer baluns, with two practical broadband compensation techniques derived. Several critical issues regarding the practical design of broadband balance-compensated transformer baluns are also discussed, including the parasitic effects in balance compensation, the consideration of windings’ turn number, and the balun design for impedance matching. As a proof-of-concept, three broadband balance-compensated transformer baluns, operating at different frequencies, are employed in a D-band frequency sextupler in [mode = text, reset-text-series = false]22 nm FD-SOI CMOS. The fabricated sextupler demonstrates a 5.1-dBm peak output power and [mode = text, reset-text-series = false]8.49% peak DC-RF efficiency at [mode = text, reset-text-series = false]145.5 GHz, and presents a 3-dB peak output power bandwidth ranging from qtyrange [mode = text,reset-text-series = false, range-units = single]127162 GHz with more than 37-dBc harmonic rejection ratio (HRR).

A Miniaturized Marchand Balun in CMOS With Improved Balance for Millimeter-Wave Applications

Compact CMOS Baluns for the 4–10 GHz Band Applications

Compact broadband Marchand balun with excellent imbalance performance for Si-based millimeter wave IC applications

Three-solenoid Windings Transformer Baluns on CMOS-grade Silicon Substrate

Design of Millimeter-Wave Transformer Balun with Isolation Circuit in Silicon Based Technology

20.8–51 GHz Highly Balanced CMOS Balun

Design and Analysis of Millimeter-Wave Marchand Balun with Interconnected Transmission Line

Compact 6.5-28.5 GHz On-Chip Balun with Enhanced Inband Balance Responses

Balance-Compensated Asymmetric Marchand Baluns on Silicon for MMICs

Analysis and Design of Broadband Balance-Compensated Transformer Baluns for Silicon-Based Millimeter-Wave Circuits

Design and modeling of an on-chip asymmetric tap balun for CMOS millimeter-wave circuits

800Mhz~2.5ghz Miniaturized Multi-layer Symmetrical Stacked Baluns for Silicon Based RF ICs

A CMOS Balun with Common Ground and Artificial Dielectric Compensations Applied in a Wideband RF Front-End

Modified CMOS monolithic stacked coupled stripline balun for millimeter-wave applications

A Wideband Transformer Balun with Center Open Stub in Cmos Process

Analysis and Modeling of Broadband CMOS Monolithic Balun Up to Millimeter-Wave Frequencies

A Compact 1.08–5.94 GHz Balun with 1○/0.07 Db Phase-/Amplitude-Imbalances Using Reverse Series Paths

Optimized Design of a Novel Broadband LTCC Balun for Wireless Application

The Study and Design of a Miniaturized Microstrip Balun with a Wider Bandwidth

Three Compact Active Baluns with High Phase/Amplitude Balance and Low Power in 65-nm CMOS for Transceiver Applications