Abstract:SiC/SiC composites, prepared by reactive melt infiltration (RMI), exhibit exceptional properties. However, the presence of residual Si in the composite matrix can significantly compromise their high-temperature mechanical properties. Addressing the issue of high-content residual Si aggregation remains a crucial focus of research in order to fully unlock the application potential of SiC/SiC composites prepared by RMI. In this work, a special porous carbon (C g ) is successfully synthesized and introduced into the porous 2D SiC/SiC composites prepared by CVI. The unique pore structure of the SiC/SiC-C g is thoroughly analyzed, along with its liquid Si infiltration process. The difference in coefficient of thermal expansion (CTE) between SiC and C g can cause thermal stress, which can destory the C g structure. Consequently, the C particles detach from the C g skeleton and react with liquid Si to create SiC. This process effectively separates residual Si and helps alleviate the negative effects of residual Si aggregation. The microstructure and phase distribution of SiC/SiC composites obtained by liquid Si infiltrating different C structures are investigated and compared, and it demonstrates the positive effect of C g on the uniform phase distribution of matrix in the composites. The as-received SiC/SiC composites possess a density of 2.94 g/cm 3 with open porosity of 1.23%, and a flexural strength of 808.7±10.2MPa, a fracture toughness of 25.5±1.8MPa·m 1/2 , a tensile strength of 317.4±12.4MPa and a proportional ultimate stress of 157.33±4.1MPa. Acoustic emission (AE) and digital image correlation (DIC) technology are used to study the special mechanical behavior of composites.

Experimental studies and computer simulation of permeability determination of porous SiC preforms

Effect of Pore-forming Agents Content on Porosity and Experimental Study on Porosity Measurement of Porous SiC Preform

Numerical Simulation of Unidirectional Infiltration of Silicon Carbide Preforms

Helium Permeability Measurement of Sic Ceramic Composites for Advanced Reactor Application

Study on Preparation of SiC Preform for Electronic Packaging Material

A Low Cost Preparation of C/SiC Composites by Infiltrating Molten Si into Gelcasted Pure Porous Carbon Preform

Influence of the Porosity of C/C on the Characterization of C/C-Sic Composites Prepared by Reactive Melt Infiltration Method

Fabrication of Co-Continuous SiC/Al Composites from Novel SiC Preforms with High Porosity and Controllable Pore Size

Effect of porous Si 3 N 4 preform on the mechanical properties of Si 3 N 4 /Al composites with interpenetrating network structure

Permeating behaviour of porous SiC ceramics fabricated with different SiC particle sizes

Pressureless Infiltration Preparation of High SiC/Al Ceramic Matrix Composites

Preparation of Porous SiC Reinforced Metal Matrix Composites

Simulation on the Effect of Porosity in the Elastic Modulus of SiC Particle Reinforced Al Matrix Composites

Effect of Chemical Vapor Infiltration of Si3n4 on the Mechanical and Dielectric Properties of Porous Si3n4 Ceramic Fabricated by A Technique Combining 3-D Printing and Pressureless Sintering

In-situ X-ray tomography on permeability evolution of C/SiC porous ceramic for hypersonic vehicles

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

Infiltration of SiC Preforms with Iron Silicide Melts: Microstructures and Properties

Relation Between Porosity and Permeability of Ceramic Membrane Supports

Numerical and Experimental Studies of the Pore Size Impacts on Dielectric and Mechanical Properties for Porous Si <sub>3</sub>N <sub>4</sub> for Radome Application

Microstructure Evolution and Performance Improvement of Silicon Carbide Ceramics via Impregnation Method

Permeability measurement of a 3D-printed AlSi10Mg porous medium: comparisons between first results with different experimental and numerical techniques