Abstract:Direct-ink-writing (DIW)-based 3D-printing technology combined with the direct-foaming method provides a new strategy for the fabrication of porous materials. We herein report a novel method of preparing porous SiC ceramics using the DIW process and investigate their mechanical and wave absorption properties. We investigated the effects of nozzle diameter on the macroscopic shape and microstructure of the DIW SiC green bodies. Subsequently, the influences of the sintering temperature on the mechanical properties and electromagnetic (EM) wave absorption performance of the final porous SiC-sintered ceramics were also studied. The results showed that the nozzle diameter played an important role in maintaining the structure of the SiC green part. The printed products contained large amounts of closed pores with diameters of approximately 100–200 μm. As the sintering temperature increased, the porosity of porous SiC-sintered ceramics decreased while the compressive strength increased. The maximum open porosity and compressive strength were 65.4% and 7.9 MPa, respectively. The minimum reflection loss (RL) was −48.9 dB, and the maximum effective absorption bandwidth (EAB) value was 3.7 GHz. Notably, porous SiC ceramics after sintering at 1650 °C could meet the application requirements with a compressive strength of 7.9 MPa, a minimum RL of −27.1 dB, and an EAB value of 3.4 GHz. This study demonstrated the potential of direct foaming combined with DIW-based 3D printing to prepare porous SiC ceramics for high strength and excellent EM wave absorption applications.

In-situ X-ray tomography on permeability evolution of C/SiC porous ceramic for hypersonic vehicles

Novel C/SiC porous ceramic with controllable properties served as transpiration cooling material

Study on transpiration cooling performance of SiC porous ceramics

Influence of mass ratios between SiC particles and chopped carbon fibers on properties of C/SiC/SiO2 porous ceramics

Phase-change transpiration cooling in heterogeneous composite porous plates: Heat transfer characteristics and their prediction

Helium Permeability Measurement of Sic Ceramic Composites for Advanced Reactor Application

3D in situ observation of the capillary infiltration of molten silicon in a SiC/SiC composite by X-ray tomography

Study on Microstructures of 2D and 3D Chemical Vapor Infiltration SiC/SiC Composites

Microstructure Characterization by X-Ray Computed Tomography of C/C-SiC Ceramic Composites Fabricated with Different Carbon Fiber Architectures

Microstructures, Mechanical Properties and Electromagnetic Wave Absorption Performance of Porous SiC Ceramics by Direct Foaming Combined with Direct-Ink-Writing-Based 3D Printing

Mechanical and dielectric properties of porous and wave-transparent Si3N4-Si3N4 composite ceramics fabricated by 3D printing combined with chemical vapor infiltration

Microstructure, Mechanical and Ablation Properties of Transpiration Cooling Applied to C/C-SiC Composite for Novel Anti-ablation Material

Investigation of Supersonic Transpiration Cooling Through Sintered Metal Porous Flat Plates

Porous ZrO2–ZrO2 ceramics with excellent mechanical strength and permeability for transpiration cooling

The Effect of Molten Salt Infiltration on 2D SiCf/SiC Composite by Chemical Vapour Infiltration

Three-dimensional micro-pipelines high thermal conductive C/SiC composites

3D observations of room temperature capillary infiltration mechanism in SiC compacts

Numerical simulation of heat transfer during spark plasma sintering of porous SiC

Investigation of the bulging mechanism of C/SiC coating through in situ optical observation and numerical simulation

Preparation, mechanical, dielectric and microwave absorption properties of hierarchical porous SiCnw-Si3N4 composite ceramics

Experimental Study and X-Ray Microtomography Based Cfd Simulation for the Characterization of Pressure Drop in Sinter Bed