Gel-casting for manufacturing porous alumina ceramics with complex shapes for transpiration cooling
Y. Belrhiti,P. Kerth,M. McGilvray,L. Vandeperre,Y. BelrhitiP. KerthM. McGilvrayL. Vandeperrea Department of Materials,Imperial College London,London,UKb Oxford Thermofluids Institute,University of Oxford,Oxford,UK
DOI: https://doi.org/10.1080/17436753.2023.2265204
2023-10-11
Advances in Applied Ceramics
Abstract:Various porous materials have been used for transpiration cooling experiments including ultra-high-temperature-ceramic (UHTCs) such as ZrB 2 [ Citation 1 ]. Thanks to their low thermal conductivity, high emissivity and ability to be formed into complex shapes, Al 2 O 3 porous ceramics are good candidates for short-duration hypersonic wind tunnel testing [ Citation 2 ] to mimic the porous structure of ZrB 2 used for transpiration cooling in hypersonic flights at high temperatures [ Citation 3 ]. Transpiration cooling technology is based on the introduction of a cool layer of gas between the component and the hot freestream flow to reduce the heat flux to the material in a hostile environment [ Citation 4–9 ]. Different techniques can be used to obtain ceramic materials of complex shapes such as 3D printing which enables the creation of complex shapes layer by layer making it highly customisable, however, material choices might be limited in addition to the slip-casting process which involves pouring a ceramic slurry into a mould, making it suitable for complex shapes. It is more adapted for high-density ceramics and achieving uniform material distribution can be challenging. The process selected to prepare these porous samples is gel-casting which has rapidly evolved from a laboratory [ Citation 10 ] invention to industrial applications in different sectors. Its great advantages [ Citation 11 ] are that very complex shapes at different scales can be made with relative ease with high green strength, low organic content, easy binder removal performed during sintering and highly homogeneous material properties. Previously in gel-casting formulations, gelation was obtained through polymerisation of acrylamide monomers, which are classified as neuro-toxic, then, replaced by a non-toxic gel former such as gelatine [ Citation 12 ].
materials science, ceramics