Abstract:Prestressed high-strength concrete (PHC) pipe pile with the static press-in method has been widely used in recent years. The generation and dissipation of excess pore water pressure at the pile–soil interface during pile jacking have an important influence on the pile’s mechanical characteristics and bearing capacity. In addition, this can cause uncontrolled concrete damage. Monitoring the change in excess pore water pressure at the pile–soil interface during pile jacking is a plan that many researchers hope to implement. In this paper, field tests of two full-footjacked piles were carried out in a viscous soil foundation, the laws of generation and dissipation of excess pore water pressure at the pile–soil interface during pile jacking were monitored in real time, and the laws of variation in excess pore water pressure at the pile–soil interface with the burial depth and time were analyzed. As can be seen from the test results, the excess pore water pressure at the pile–soil interface increased to the peak and then began to decline, but the excess pore water pressure after the decline was still relatively large. Test pile S1 decreased from 201.4 to 86.3 kPa, while test pile S2 decreased from 374.1 to 114.3 kPa after pile jacking. The excess pore water pressure at the pile–soil interface rose first at the initial stage of consolidation and dissipated only after the hydraulic gradient between the pile–soil interface and the soil surrounding the pile disappeared. The dissipation degree of excess pore water pressure reached about 75–85%. The excess pore water pressure at the pile–soil interface increased with the increase in buried depth and finally tended to stabilize.

Monitoring and Analysis of Phc Pipe Piles under Hydraulic Jacking Using Fbg Sensing Technology

Application of Fiber Bragg Grating Sensor in PHC Pipe Pile: Axial Force Test

Experimental Research Based on the Optical Fiber Sensing Technology for a Jacked PHC Pipe Pile Penetration Process

FBG sensor based dynamic monitoring and analysis on sliding construction of a Prestressed Reticulated Shell-String structure

Fiber Bragg Grating Sensors for Pile Jacking Monitoring in Clay Soil

Field Studies on Effect of Jacked Pile on Adjacent Buildings and Roads in Clay

Test and Study of Pipe Pile Penetration in Cohesive Soil Using FBG Sensing Technology

Field Tests of Offshore Driven Piles Subjected to Lateral Monotonic and Cyclic Loads in Soft Clay

Investigation on in-situ test of penetration characteristics of open and closed PHC pipe piles

Experimental study on axial compression monitoring of pile foundation based on sensor-enabled piezoelectric geocable

Field Behavior of Pre-Stressed High-Strength Concrete Nodular Piles and PHC Pipe Piles Under Compression in Soft Soil Areas

Investigation of Less Temperature-Sensitive Fiber Bragg Grating Strain Sensor in Pile Jacking Field Test

Field Behavior of Driven Prestressed High-Strength Concrete Piles in Sandy Soils

Application of Miniature FBG-MEMS Pressure Sensor in Penetration Process of Jacked Pile

Field testing study on jacked pile penetration characteristics in laminated clay based on FBG sensing technology

BOTDR Monitoring Analysis of Anti-Sliding Pile Internal Force

Field test of earth pressure at pile-soil interface by single pile penetration in silty soil and silty clay

Field Study of the Stress Development in PHC–steel Composite (PSC) Piles During Static Load Tests

Field Test of Excess Pore Water Pressure at Pile–Soil Interface Caused by PHC Pipe Pile Penetration Based on Silicon Piezoresistive Sensor

Site-based Experimental Study on Pipe Behavior During Pipe Jacking

Flexural performances of prestressed high strength concrete piles reinforced with hybrid GFRP and steel bars