Abstract:In concealed underground projects, pile foundations may cause severe engineering accidents owing to factors such as construction technology, geological conditions, and material properties. Accordingly, the construction industry has invariably focused on developing high-precision, distributed, and low-cost monitoring and disaster warning methods. Therefore, a new sensing material, sensor-enabled piezoelectric geocable (SPGC), was developed to monitor the deformation and failure of a pile foundation. Three model piles were constructed, and packaging and layout processes for the SPGC sensing material were proposed. Moreover, a fiber Bragg grating (FBG) sensor and resistance strain gauge were installed for comparison. Pile foundation failure and static load tests were performed using a large servo hydraulic press. The monitored effect was evaluated by obtaining the impedance and voltage signals of the SPGC. Pile foundation failure test results show that the mutation of impedance and voltage signals can be used as combined monitoring data, and the electrical signal of the SPGC can be used in three stages of early warning response. These findings ensure that pile foundation damage can be located, damage precursors can be identified, and timely warning can be provided. The static load test results indicate that the SPGC data are in good agreement with the FBG sensor and strain gauge data. The impedance of the SPGC increases linearly with the load. Accordingly, a linear calculation formula relating impedance and strain is derived. The research results are expected to provide a new technical method for pile foundation construction and long-term operation and maintenance monitoring.

Application of Fiber Bragg Grating Sensor in PHC Pipe Pile: Axial Force Test

Monitoring and Analysis of Phc Pipe Piles under Hydraulic Jacking Using Fbg Sensing Technology

Test and Study of Pipe Pile Penetration in Cohesive Soil Using FBG Sensing Technology

FBG sensor based dynamic monitoring and analysis on sliding construction of a Prestressed Reticulated Shell-String structure

Experimental Research Based on the Optical Fiber Sensing Technology for a Jacked PHC Pipe Pile Penetration Process

Bearing Performance of Steel Pipe Pile in Multilayered Marine Soil Using Fiber Optic Technique: A Case Study

Fiber Bragg Grating Sensors for Pile Jacking Monitoring in Clay Soil

Experimental study on axial compression monitoring of pile foundation based on sensor-enabled piezoelectric geocable

Performance evaluation of buried pipe under loading using fiber Bragg grating and particle image velocimetry techniques

Field testing study on jacked pile penetration characteristics in laminated clay based on FBG sensing technology

Field Study of the Stress Development in PHC–steel Composite (PSC) Piles During Static Load Tests

Measuring geo-grids stress using distributed fiber-optic sensors based on pulse-prepump-Brillouin optical time domain analysis

Application of Miniature FBG-MEMS Pressure Sensor in Penetration Process of Jacked Pile

Performance Monitoring of Offshore PHC Pipe Pile Using BOFDA-based Distributed Fiber Optic Sensing System

Investigation of Less Temperature-Sensitive Fiber Bragg Grating Strain Sensor in Pile Jacking Field Test

Investigation on in-situ test of penetration characteristics of open and closed PHC pipe piles

Real-time strain monitoring and control of urban bridge cluster monitoring system with FBG sensor

Field Monitoring of Bearing Capacity Efficiency of Permeable Pipe Pile in Clayey Soil: A Comparative Study

Field Behavior of Driven Prestressed High-Strength Concrete Piles in Sandy Soils

Distributed fiber optic sensing along driven ductile piles: Design, sensor installation and monitoring benefits

Optical FBG's Sensing Properties and Practical Application in Civil Infrastructures