Abstract:Permeable pipe piles are set in the soft soil foundation to accelerate the dissipation rate of excess pore water pressure induced by pile driving and then to accelerate the consolidation of soil around the pile. At present, there are many studies, including model tests and numerical simulation, on the bearing capacity and permeability performance of permeable pipe piles. However, few field tests have been conducted to deeply study the time effect of bearing capacity and load transfer law of permeable pipe piles. Based on the fiber Bragg grating (FBG) technology, the static load tests were carried out to study the straindistribution and internal force transfer of the permeable pipe pile in soft soil foundation. Meanwhile, the relationship between the variation of excess pore water pressure of the pile-soil interface with time at different positions of the pile body and the time effect of bearing capacity of the permeable pipe pile was analyzed. The test results showed that at the early stage of pile driving, the growth rate of bearing capacity of a single permeable pipe pile under increased vertical loads was higher, and then gradually decreased with time. Under the test site conditions, the improvement of the bearing capacity of the permeable pipe pile within 10 days was mainly attributed to the pile side friction, whereas the pile tip resistance made more contribution to the improvement of bearing capacity within 10-24 days. The excess pore water pressure of the pile-soil interface increased along with the depth of the pile. With the rapid dissipation of excess pore water pressure near the pile tip, the effective stress of soil gradually increased, and the pile side friction and pile tip resistance also increased. This study provides an improved insight into the design and construction of permeable pipe piles in soft soil foundation.

Field Monitoring of Bearing Capacity Efficiency of Permeable Pipe Pile in Clayey Soil: A Comparative Study

Statistical research on performance of prestressed concrete pipe piles

Study on Bearing Capacity of Permeable Pipe Pile by Field Optical Fiber Monitoring

Theoretical study of dynamic pore water pressure dissipation characteristics of open-hole pipe pile

Application of Fiber Bragg Grating Sensor in PHC Pipe Pile: Axial Force Test

Innovative Design of Pipe Piles Combined Both the Effect of Pile Foundation and Composite Foundation for Soft Soil Treatment

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Experimental Study of the Bearing Capacity of a Drainage Pipe Pile under Vacuum Consolidation

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Field testing study on jacked pile penetration characteristics in laminated clay based on FBG sensing technology

Field Tests on Behavior of Pre-Bored Grouted Planted Pile and Bored Pile Embedded in Deep Soft Clay

Bearing Performance of Steel Pipe Pile in Multilayered Marine Soil Using Fiber Optic Technique: A Case Study

Field Study on Installation Effects of Pre-Bored Grouted Planted Pile in Deep Clayey Soil

Field Study of Monotonic and Cyclic Lateral Behaviour of Piles in Soft Soils Improved with and Without Vacuum Preloading

Laboratory tests on the frictional capacity of core pile - cemented soil interface

Field Behavior of Pre-Bored Grouted Planted Nodular Pile Embedded in Deep Clayey Soil

Field Study of Bearing Behavior of Pile-Net Composite Foundation

Field study on the behavior of pre-bored grouted planted pile with enlarged grout base

Field Tests on Behavior of Pre bored Grouted Planted Pile in Soft Soil Area with Existing Pile Foundation