Abstract:Buckling failure is a special form of a landslide, and it has been little debated in the literature so far. There have been few studies conducted on this type of slope failure, and the corresponding reinforcement measure research has also been rarely conducted. Therefore, it is nearly impossible to provide systematic guidance for the reinforcement and monitoring of such a slope. In this study, a new type of slope test system is developed, and the reinforcement effect of double-row piles was studied using simplified laboratory tests. Under the conditions of no pile and piles, load tests on the sliding body were carried out, and the ultimate loads that can be borne by the slope sliding body under these two conditions were analyzed. The multivariate information evolution of stress, displacement, and pile deformation under these two conditions were studied using multiple monitoring methods. The results showed that anti-slide piles can significantly improve the ability of the sliding body to withstand external loads. For the condition of no piles, 4 kN/m (20.55 kPa) was the critical value and the critical load the slope could bear reached 10 kN/m (51.38 kPa) after the installation of piles. The first row of piles withstood more load than the second row of piles, and double-row pile reinforcement can effectively improve the anti-slip safety reserve. In addition, monitoring of the deformation of the slope and anti-sliding piles should focus on the position of the sliding body and the slip face. Based on the results of laboratory tests, on-site field monitoring was then conducted on the target slope, including displacement monitoring at different positions on the slope before and after anti-slide pile construction, deformation monitoring of anti-slide piles, and rock stress monitoring around anti-slide piles. Monitoring results showed that the slope deformation and rock mass stress tended to be stable after anti-sliding pile construction, and the anti-slide piles were conducive to a safe state. The results of this study provide a useful reference for the reinforcement and monitoring of buckling failure in an actual slope.

BOTDR Monitoring Analysis of Anti-Sliding Pile Internal Force

Determining Landslide Thrust on Anti-Sliding Pile by BOTDR Monitoring Technology

Fiber Optic Monitoring of an Anti-Slide Pile in a Retrogressive Landslide

Monitoring and Calculation of Anti-Slide Piles Internal Force

EVALUATION AND ANALYSIS OF WORKING STATE OF ANTI-SLIDE PILE WITH BOTDR TECHNOLOGY

EVALUATION OF STATE OF ANTI-SLIDE PILES BASED ON INCLINOMETER DATA

Application of Fiber Bragg Grating Sensor in PHC Pipe Pile: Axial Force Test

Field Tests of Offshore Driven Piles Subjected to Lateral Monotonic and Cyclic Loads in Soft Clay

FBG sensor based dynamic monitoring and analysis on sliding construction of a Prestressed Reticulated Shell-String structure

Model tests on displacement field of internal soil induced by laterally loading pile

Application of Distributed Optical Fiber Sensing to Testing Inner Force of Prefabricated Piles

A Destructive Field Study on the Behavior of Pile under Ten

Application of a Distributed Optical Fiber Sensing Technique in Monitoring the Stress of Precast Piles

DISTRIBUTION OF LANDSLIDE THRUST ON CANTILEVER DOUBLE-ROW ANTI-SLIDING PILES

Assessment of Cohesive Soil Landslide Driving Forces Exerted on Piles Considering Soil Arching Effects

Bearing Performance of Steel Pipe Pile in Multilayered Marine Soil Using Fiber Optic Technique: A Case Study

Model Test on Load Transfer Mechanism of a Static Drill Rooted Nodular Pile

A Laboratory and Field-Monitoring Experiment on the Ability of Anti-Slide Piles to Prevent Buckling Failures in Bedding Slopes

Distributed fiber optic sensing along driven ductile piles: Design, sensor installation and monitoring benefits

Analysis of Influence Factors of Anti-Slide Pile with Prestressed Anchor Cable Based on Bearing and Deformation Characteristics of Pile Body

Research on the bearing mechanism of the super-long pile based on BOTDR