Abstract:In concealed underground projects, pile foundations may cause severe engineering accidents owing to factors such as construction technology, geological conditions, and material properties. Accordingly, the construction industry has invariably focused on developing high-precision, distributed, and low-cost monitoring and disaster warning methods. Therefore, a new sensing material, sensor-enabled piezoelectric geocable (SPGC), was developed to monitor the deformation and failure of a pile foundation. Three model piles were constructed, and packaging and layout processes for the SPGC sensing material were proposed. Moreover, a fiber Bragg grating (FBG) sensor and resistance strain gauge were installed for comparison. Pile foundation failure and static load tests were performed using a large servo hydraulic press. The monitored effect was evaluated by obtaining the impedance and voltage signals of the SPGC. Pile foundation failure test results show that the mutation of impedance and voltage signals can be used as combined monitoring data, and the electrical signal of the SPGC can be used in three stages of early warning response. These findings ensure that pile foundation damage can be located, damage precursors can be identified, and timely warning can be provided. The static load test results indicate that the SPGC data are in good agreement with the FBG sensor and strain gauge data. The impedance of the SPGC increases linearly with the load. Accordingly, a linear calculation formula relating impedance and strain is derived. The research results are expected to provide a new technical method for pile foundation construction and long-term operation and maintenance monitoring.

Evaluating the effect of post-grouting on long bored pile based on ultra-weak fiber Bragg grating array

Application of Fiber Bragg Grating Sensor in PHC Pipe Pile: Axial Force Test

Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

FBG sensor based dynamic monitoring and analysis on sliding construction of a Prestressed Reticulated Shell-String structure

Application of Ultra-Weak FBG Technology in Real-Time Monitoring of Landslide Shear Displacement

A Novel Method for Testing the Effect of Base Post-Grouting of Super-Long Piles

Measuring geo-grids stress using distributed fiber-optic sensors based on pulse-prepump-Brillouin optical time domain analysis

Real-time strain monitoring and control of urban bridge cluster monitoring system with FBG sensor

Ultra-weak FBG Sensing for Identification and Analysis of Plastic Zone of Soil Caused by Supported Excavation

Experimental study on axial compression monitoring of pile foundation based on sensor-enabled piezoelectric geocable

APPLIED RESEARCH ON MONITORING TENSION OF PRESTRESSED CONCRETE BEAM BASED ON FBG SENSING TECHNOLOGY

Monitoring of Metro-Tunnel Freezing Construction Using Fiber Sensing Technology

Safety monitoring of railway tunnel construction using FBG sensing technology

Life Cycle Monitoring of Offshore Steel Pipe Piles via UWFBG Wireless Sensor Network

Monitoring of Tunnel Excavation Based on the Fiber Bragg Grating Sensing Technology

Fiber-optic Wireless Sensor Network Using Ultra-Weak Fiber Bragg Gratings for Vertical Subsurface Deformation Monitoring

Distributed fiber optic sensing along driven ductile piles: Design, sensor installation and monitoring benefits

Field test research on post-grouting effect for super-long cast-in-place bored pile in thick soft foundation

Experimental Study on Feasibility of Fiber Bragg Grating-Based Foundation Deformation Monitoring

Ground Movement Monitoring Using an Optic Fiber Bragg Grating Sensored System

Structural health monitoring of smart civil structures based on fiber Bragg grating sensing technology