Abstract:Graceful toughness and high strength are mutually exclusive in engineering ZrC-SiC ceramic, which are hard to be possessed simultaneously. Here, the pyrolytic carbon (PyC) coated short chopped carbon fibers were utilized to toughen ZrC-SiC ceramic, tackling the dilemma between toughness and strength. Through the uniform incorporation of PyC coated short chopped carbon fibers, the penetration crack mode of ZrC-SiC was changed into an obviously deflecting propagation path with closed phenomenon. The PyC coating brought about a relatively weak interface bonding and guided the crack propagate along the weak interface, consequently resulting in a more flexuous crack propagation instead of passing through the fibers directly. Meanwhile, the fibers received effective protection of coating inhibiting from performance degradation. The PyC coated Cr/ZrC-SiC obtained a fracture toughness highly reaching 7.57 +/- 0.33 MPa m(1/2) with a rivaling flexural strength at 268 +/- 16 MPa. Moreover, the graceful load-displacement curve is illustrated with a smoothly extended displacement of 0.12 mm and increased load to 83 N, which forms an obvious yield plateau. To some degree, this work provided an effective solution to tackling the dilemma between toughness and strength of engineering ZrC-SiC ceramic.

Laminated ZrB2–SiC/graphite Ceramics with Simultaneously Improved Flexural Strength and Fracture Toughness

Microstructure and Mechanical Properties of Laminated ZrB2–SiC Ceramics with ZrO2 Interface Layers

Laminated ZrB2–SiC Ceramic with Improved Strength and Toughness

Strong and Tough ZrB2 Materials Using a Heterogeneous Ceramic-Metal Layered Architecture

Toughening of Laminated ZrB2–SiC Ceramics with Residual Surface Compression

High toughness and R-curve behaviour of laminated SiC/graphite ceramics

The Fabrication and Mechanical Properties of SiC/ZrB2 Laminated Ceramic Composite Prepared by Spark Plasma Sintering

Toughness and R-curve behaviour of laminated Si3N4/SiCw ceramics

Mechanical and Ablation Properties of Laminated ZrB2–SiC/BN Ceramics

Effect of Molding Process on Properties of Laminated Zrb2-Sic-C-G Ultra High Temperature Ceramics

Effect of Molding Process on Properties of Laminated ZrB<sub>2</sub>-SiC-C<sub>g</sub> Ultra High Temperature Ceramics

Toughness Mechanism of Layered ZrB2 Based Composite Ceramic

Microstructure And Mechanical Properties Of Zrb2-Based Composites With Laminated Structure

Improved Fracture Toughness of Laminated ZrB2-SiC-MoSi2 Ceramics Using SiC Whisker

Fabrication and Mechanical Properties of Laminated HfC–SiC/BN Ceramics

Mechanical Properties and Toughening Mechanisms of Si3n4 Matrix Laminated Ceramic Composite

Effect of graphite flake on the mechanical properties of hot pressed ZrB2–SiC ceramics

Effect of Pyrolytic Carbon Coating on the Microstructure and Fracture Behavior of the Cf/ZrB2-SiC Composite

The Fabrication and Mechanical Properties of Bionic Laminated ZrB2–SiC/BN Ceramic Prepared by Tape Casting and Hot Pressing

Mechanical and ablation properties of laminated ZrB2-SiC ceramics with Si3N4 whisker interface

Using PyC Coated Short Chopped Carbon Fiber to Tackle the Dilemma Between Toughness and Strength of ZrC-SiC