Abstract:The change in CTE of Cf‐ZrW2O8/9621 composites. Thermal expansion of materials is a critical factor influencing their dimensional stability. This study explores the regulation of thermal expansion in composite materials through the incorporation of carbon fibers and zirconium tungstate particles. The influence of fiber length on the thermal expansion behavior of these composites was investigated. The investigation reveal that the variation in the relative elongation ratio (dl/L0) of the carbon fiber‐reinforced zirconium tungstate composites is nonlinear, characterized by an initial increase, subsequent decrease, and a final resurgence. Notably, an increase in fiber length results in a mitigated rate of increase in the (dl/L0) ratio. Furthermore, composites fabricated with shorter fibers exhibit a higher coefficient of thermal expansion (CTE). Upon elevating the temperature to 250°C, the CTE for composites reinforced with 100 and 500 mesh carbon fibers escalate to 24.5 × 10−6/K and 74.6 × 10−6/K, respectively. These values represent an 8% and 116% enhancement relative to those measured at 50°C. Highlights The thermal expansion properties are improved by adding carbon fiber and ZrW2O8 nanoparticles. Utilizing fiber lengths ranging from 100 to 500 mesh effectively diminishes the CTE. The Cf‐ZrW2O8/9621 composite exhibits non‐linear behavior in its dl/L0 ratio. Within the range, longer fibers are more beneficial for reducing the CTE.

Variation of Thermal Expansion of Carbon/carbon Composites from 850 to 2500°C

Thermal Expansion Behavior of Carbon Fiber Reinforced Chemical-Vapor-infiltrated Silicon Carbide Composites from Room Temperature to 1400 °C

Multi-scale Modeling of Thermal Expansion Coefficients of C/C Composites at High Temperature

Experimental Description of Thermomechanical Properties of Carbon Fiber-Reinforced Tic Matrix Composites

Flexural Properties of Carbon-Carbon Composites at Temperatures Up to 2600 °C

Carbon nanotube reinforced pyrocarbon matrix composites with high coefficient of thermal expansion for self-adapting ultra-high-temperature ceramic coatings

Thermal Expansion Behaviors of Aluminum Composite Reinforced with Carbon Nanotubes

A method for predicting thermal expansion coefficients of carbon fiber/epoxy composites with void defects

Experimental Study of High-Temperature Tensile Mechanical Properties of 3D Needled C/C–SiC Composites

Microstructure, Thermophysical Property and Ablation Behavior of High Thermal Conductivity Carbon/carbon Composites after Heat-Treatment

The effect of carbon fiber length on the thermal expansion of fiber‐reinforced particulate hybrid composites

Thermal Aging Behavior of Carbon Fiber/Epoxy Composites at High Temperature

Experimental study of thermal expansion behavior on braided structure composite

Interface and Thermal Expansion of Carbon Fiber Reinforced Aluminum Matrix Composites

Theoretical Analysis of Thermophysical Properties of 3D Carbon/Epoxy Braided Composites with Varying Temperature

Tensile Properties of Two-Dimensional Carbon Fiber Reinforced Silicon Carbide Composites at Temperatures Up to 2300 °C

Experimental Investigation of the Microstructures and Tensile Properties of Polyacrylonitrile-Based Carbon Fibers Exposed to Elevated Temperatures in Air

A Numerical Study on the Thermal Conductivity of 3D Woven C/C Composites at High Temperature

Mechanical Behavior of carbon felt-carbon composites under ultra-high temperature

Coefficient of thermal expansion and compute of carbon fibre reinforced magnesium composites

Compressive experimental method and properties of C/C composites under ultra-high temperature environment