Abstract:To accurately predict the Effective Thermal Conductivities (ETCs) of Three-Dimensional (3D) braided composites, this work proposes a multi-scale and multi-step Mean-Field Homogenization (MFH) method. The composites are considered as the composites with 3D multi-directional braiding yarns as inclusions at the meso-scale, and the braiding yarns are viewed as unidirectional fibers reinforced composites at the micro-scale. The ETCs of the braiding yarns are firstly determined using the MFH method at the micro-scale. According to the yarn orientation, the composites are virtually decomposed into several pseudo-grains, each of which consists of the oriented braiding yarns and matrix, and the multi-step MFH method is then developed to predict the ETCs of the pseudo-grains and the composites sequentially at the meso-scale, i.e. the MFH prediction of the ETCs of each pseudo-grain individually and the composites consisting of all the pseudo-grains in two sequential steps. The proposed multi-scale and multi-step MFH method is validated by comparing with the multi-scale FE homogenization method and the available experimental test. The modeling results show that the through-thickness and in-plane ETCs of the composites increase with the increase of fiber volume fraction and transverse ETC, and decrease and increase with the increase of interior braiding angle, respectively. The proposed multi-scale and multi-step MFH method possesses the advantages of better computational efficiency and simpler implementation compared with the multi-scale FE homogenization method.

Theoretical Analysis of Thermophysical Properties of 3D Carbon/Epoxy Braided Composites with Varying Temperature

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

A Numerical Study on the Thermal Conductivity of 3D Woven C/C Composites at High Temperature

Experimental study of thermal expansion behavior on braided structure composite

Multi-scale Modeling of Thermal Expansion Coefficients of C/C Composites at High Temperature

Numerical analyses on thermal stress distribution induced from impact compression in 3D carbon fiber/epoxy braided composite materials

On the tensile properties and failure mechanisms of 3D six-directional braided composites at elevated temperatures

Experimental and numerical study of in-plane compressive properties and failure of 3D six-directional braided composites with large braiding angle

Effective Elastic Properties of 3d Carbon-Carbon Composites at High Temperature

Analysis of transverse thermal conductivity for mesophase pitch-based carbon fibers and the through-thickness heat conduction of their composites

Longitudinal compression fatigue properties of 3D five-directional braided composites at different temperatures

Thermo-Viscoelastic Response of 3D Braided Composites Based on a Novel FsMsFE Method

Effects of temperature and strain rate on impact compression behaviors of three-dimensional carbon fiber/epoxy braided composites

Computational Study of the Nanoscale Mechanical Properties of C-S-H Composites under Different Temperatures

Experimental study of the anisotropic thermal conductivity of 2D carbon-fiber/epoxy woven composites

Experimental study on the fabrication, high-temperature properties and failure analysis of 3D seven-directional braided composites under compression

An elastoplastic mechanical-thermal model for temperature rise simulation of two-dimensional triaxially braided composites under quasi-static loads

X-ray microtomography analysis of the damage mechanisms in 3D circular braided carbon fiber/epoxy resin composite tubes under axial impact compression

The temperature effect on the inter-laminar shear properties and failure mechanism of 3D orthogonal woven composites

Multi-scale and multi-step modeling of thermal conductivities of 3D braided composites

Thermal expansion coefficients of 3-D braided composites with penny-shaped microcracks