Abstract:High temperature thermal conductivity up to 1200 °C and the electrical conductivity up to 800 °C were studied for (Zr-Ta-W-Ti)C-SiC (ZTaWT-S) based high entropy carbide ceramics containing carbonaceous reinforcements (multi-walled carbon nanotubes (CNT), graphite flakes (G), and graphene nanoplatelets (GNP). The thermal diffusivity (0.055–0.067 cm −2 s) and specific heat capacity (0.38–0.44 Jg −1 K −1 ) were experimentally measured from 50 °C to 1200 °C for all the composites. The thermal conductivity of the composites lies in the range of 18.2 Wm −1 K −1 to 22.9 Wm −1 K −1 for the temperature range of 50 °C-1200 °C, from the significant phonon scattering at the interfaces of the elements of different size and atomic masses. At 50 °C, the limited thermal conductivity enhancement for carbonaceous reinforcements from 18.2 Wm −1 K −1 for ZTaWT-S to 21.0 Wm −1 K −1 for ZTaWT-SC (CNT reinforcement) to 20.8 Wm −1 K −1 for ZTaWT-SG (graphite reinforcement), and to 19.9 Wm −1 K −1 ZTaWT-SGNP (graphene reinforcement) is attributed to the high thermal resistance at the interfaces between different phases and interface with carbon additives, evident in the TEM investigation of the crushed sintered sample, and at the grain boundaries (interfacial thermal resistance). The phonon and electron contribution to thermal conductivity were also assessed and the κe/κexp ratio analysis confirms the predominant role of phonon contribution to thermal conductivity (∼65%) at low temperature (∼50 °C) and of electronic contribution at high temperatures (∼800 °C) as the dominant mechanism of thermal transport in the investigated composites and ZTaWT-SGNP composite with the highest κe/κexp ratio of 0.84 (extrapolated) emerges as the most electronically conductive material.

Carbon nanotube reinforced pyrocarbon matrix composites with high coefficient of thermal expansion for self-adapting ultra-high-temperature ceramic coatings

Experimental Description of Thermomechanical Properties of Carbon Fiber-Reinforced Tic Matrix Composites

An Unusual Carbon–Ceramic Composite with Gradients in Composition and Porosity Delivering Outstanding Thermal Protection Performance Up to 1900 °C

Construction of a ceramic coating with low residual stress on C/CA composites for thermal protection at ultra-high temperatures

Oxidation resistance, ablation resistance and in situ ceramization mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composites modified with Ti3SiC2

Thermal Expansion Behaviors of Aluminum Composite Reinforced with Carbon Nanotubes

Using PyC modified 3D carbon fiber to reinforce UHTC under low temperature sintering without pressure

High temperature flexural strength, microstructure, phase evolution and anti-oxidation mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composite modified with TiB2 and B4C

High-Temperature Wear Behavior and Mechanisms of Self-Healing NiCrAlY-Cr3C2-Ti2SnC Coating Prepared by Atmospheric Plasma Spraying

Dual-phase zirconate/tantalate high-entropy ceramics boost thermal properties and fracture toughness for thermal barrier coating materials

Microstructure, Thermophysical Property and Ablation Behavior of High Thermal Conductivity Carbon/carbon Composites after Heat-Treatment

MWCNT–Polyimide Fiber-Reinforced Composite for High-Temperature Tribological Applications

Improving thermal shock and ablation resistance of high thermal conductivity carbon/carbon composites by introducing carbon nanotubes

High Temperature Performance Of Micro-Plasma Sprayed Cnts/Al2o3-Tio2 Composite Coating

Thermomechanical Properties of TiC Particle-Reinforced Tungsten Composites for High Temperature Applications

High Temperature Thin-Film Sensor Technologies For Advanced Propulsion Materials

Elevated temperature thermal and electrical properties of carbon nanotubes, graphite and graphene reinforced (Zr-Ta-W-Ti)C-SiC based high entropy carbide ceramics

Fabrication of low-density carbon-bonded carbon fiber composites with an Hf-based coating for high temperature applications

Advances in oxidation and ablation resistance of high and ultra-high temperature ceramics modified or coated carbon/carbon composites

Time-dependent high-temperature compressive failure behavior of high-silica/boron-phenolic composites modified with boron carbide and talc

Ablation Experiments of Ultra-High-Temperature Ceramic Coating on Carbon–Carbon Composite Using ICP Plasma Wind Tunnel