Low-temperature steam reforming of methanol to produce hydrogen over various metal-doped molybdenum carbide catalysts

Yufei Ma,Guoqing Guan,Chuan Shi,Aimin Zhu,Xiaogang Hao,Zhongde Wang,Katsuki Kusakabe,Abuliti Abudula
DOI: https://doi.org/10.1016/j.ijhydene.2013.09.150
IF: 7.2
2014-01-01
International Journal of Hydrogen Energy
Abstract:Various transition metals (M = Pt, Fe, Co, and Ni) were selected to support on molybdenum carbides by in-situ carburization metal-doped molybdenum oxide (M-MoOx) via temperature-programmed reaction (TPR) with a final temperature of 700 °C in a reaction gas mixture of 20% CH4/H2. XRD analysis results indicated that β-Mo2C phase was formed in the case of Fe, Co, or Ni doping while α-Mo2C phase was appeared with the β-MoC1−x phase in the case of Pt doping. With the increase in Pt doping amount, more α-MoC1−x phase was produced. As-prepared metal doped molybdenum carbides were investigated as alternative catalysts for the steam reforming of methanol. Comparing with the undoped molybdenum carbide such as β-Mo2C, metal-doped one showed higher methanol conversion and hydrogen yield. It is found that Pt doped molybdenum carbide had the highest catalytic activity and selectivity among the prepared catalysts and methanol conversion reached 100% even at a temperature as low as 200 °C, and remained a long-time stability with a stable methanol conversion.
What problem does this paper attempt to address?