Abstract:Ni-based catalysts are one of the most promising Dry Reforming reaction (DRM) catalysts due to their cheapness and high catalytic activity, but the deactivation caused by severe carbon deposition is a common problem in Ni-based catalysts, and one solution is to dope with other elements. In this paper, density functional theory (DFT) combined with microkinetic simulation was used to study the effect of the surface doping concentration of Mo on the catalytic activity and carbon deposition resistance of Ni catalyst. In the surface doping model, the Mo surface doping concentration is set to 0, 1/9, 2/9, 3/9, 4/9 ML, namely Ni(111), NiMo1(111), NiMo2(111), NiMo3(111) and NiMo4(111). The electronic structure analysis shows that the doping of Mo improves the electron donating ability of the Ni catalyst and therefore generally increases the adsorption energy of the intermediate species in the DRM reaction. Compared with Ni(111), on NiMox(111)(x = 1–3), the activation energy of CH4 dissociation, the activation energy of CO2 dissociation, and the activation energy of C-O bond formation are generally reduced, while the activation energy of CH* dissociation and CHxO(x = 1–2) dehydrogenation increases. It was shown that the CH-O oxidation route is favorable for DRM and the Mo doped Ni catalyst showed lower free energy span. These DFT results clearly show the doping Mo not only improve the DRM catalytic activity but also enhance the carbon resistance ability . In the microkinetic model, the reaction sites on the catalyst surface were distinguished into sites affected by Mo (#) and sites not affected by Mo (*), and the influence of O coverage was considered on the activation energy of CO2 dissociation at the reaction sites affected by Mo. At 1073.15 K, the order of the catalytic activity of these catalysts for DRM reaction is NiMo2(111) > NiMo3(111) > NiMo1(111) > Ni(111), and NiMo2(111) shows the best catalytic activity for DRM. The microkinetic simulation results showed that without considering that adsorbed O may lead to the formation of NiMoO4 and thus affect the catalytic activity, the Mo-doped Ni catalyst, especially NiMo2(111), exhibits much higher catalytic activity than Ni(111) under high temperature conditions, and Ni(111) is mainly occupied by C* whereas NiMox(111)(x = 1–3) is basically not affected by C species when the simulation reaches a steady state. The strong electron donating ability of Mo is considered to be the basis for increasing the catalytic performance of Ni-based catalysts, which means that our conclusion can be more widely promoted, i.e. the catalytic activity and carbon deposition resistance of Ni-based catalysts can be improved by doping trace metals with strong electron donating ability .

Catalytic Activity and Stability of Nickel-Modified Molybdenum Carbide Catalysts for Steam Reforming of Methanol

Ni-modified Mo2C Catalysts for Methane Dry Reforming

Highly-efficient steam reforming of methanol over copper modified molybdenum carbide

A highly active and stable Pt modified molybdenum carbide catalyst for steam reforming of dimethyl ether and the reaction pathway

A Plate-Type Anodic Alumina Supported Nickel Catalyst for Methane Steam Reforming

On the catalytic nature of nitrided NiMo/γ-Al2O3 catalysts for dry reforming of methane

Elucidating the promoting role of Mo2C in methane activation using Ni-xMo2C/FAU to catalyze methane steam reforming

Dry reforming of methane on Ni(1 1 1) surface with different Mo doping ratio: DFT-assisted microkinetic study

Steam Reforming of Methanol for Hydrogen Production over Nanostructured Wire-Like Molybdenum Carbide Catalyst

Low-temperature steam reforming of methanol to produce hydrogen over various metal-doped molybdenum carbide catalysts

Ni/x%Nb2O5/Al2O3 Catalysts Prepared via Coprecipitation-Wet Impregnation Method for Methane Steam Reforming

Catalytic evaluation of Ni–3%Sr-/MCM-41 in dry and steam reforming of methane

Depositing the PtNi Nanoparticles on Niobium Oxide to Enhance the Activity and CO-tolerance for Alkaline Methanol Electrooxidation

Strengthening the Activity and CO Tolerance with Bi-Component PtNi/NbN-C Catalyst for Methanol Alkaline Electrooxidation

Effect of Cu–Mo Activities on the Ni–Cu–Mo/Al2O3 Catalyst for CO2 Reforming of Methane

Steam Methane Reforming Using an Anodic Alumina Supported Nickel Catalyst (Ni/Al2O3/Alloy): Analysis of Catalyst Deactivation

Promotional Effect of Ni−Sn Interaction over Ni Supported on Sn‐incorporated MCM‐41 Catalysts for CO 2 Reforming of CH 4

Tuning reverse water gas shift and methanation reactions during CO2 reduction on Ni catalysts via surface modification by MoOx

Catalytic performance of Ni catalysts for steam reforming of methane at high space velocity

Structural effect of Ni/TiO2 on CO methanation: improved activity and enhanced stability

Effect of Support on Stability and Coke Resistance of Ni-Based Catalyst in Combined Steam and CO Reforming of CH.