Abstract:Molybdenum carbide co-catalyst and carbon nanofiber matrix are suggested to improve the nickel activity toward methanol electrooxidation process. The proposed electrocatalyst has been synthesized by calcination electrospun nanofiber mats composed of molybdenum chloride, nickel acetate, and poly (vinyl alcohol) under vacuum at elevated temperatures. The fabricated catalyst has been characterized using XRD, SEM, and TEM analysis. The electrochemical measurements demonstrated that the fabricated composite acquired specific activity for methanol electrooxidation when molybdenum content and calcination temperature were tuned. In terms of the current density, the highest performance is attributed to the nanofibers obtained from electrospun solution having 5% molybdenum precursor compared to nickel acetate as a current density of 107 mA/cm2 was generated. The process operating parameters have been optimized and expressed mathematically using the Taguchi robust design method. Experimental design has been employed in investigating the key operating parameters of methanol electrooxidation reaction to obtain the highest oxidation current density peak. The main effective operating parameters of the methanol oxidation reaction are Mo content in the electrocatalyst, methanol concentration, and reaction temperature. Employing Taguchi's robust design helped to capture the optimum conditions yielding the maximum current density. The calculations revealed that the optimum parameters are as follows: Mo content, 5 wt.%; methanol concentration, 2.65 M; and reaction temperature, 50 °C. A mathematical model has been statistically derived to describe the experimental data adequately with an R2 value of 0. 979. The optimization process indicated that the maximum current density can be identified statistically at 5% Mo, 2.0 M methanol concentration, and 45 °C operating temperature.

Steam Reforming of Methanol for Hydrogen Production over Nanostructured Wire-Like Molybdenum Carbide Catalyst

Low-temperature steam reforming of methanol to produce hydrogen over various metal-doped molybdenum carbide catalysts

Hydrogen gas-assisted synthesis of worm-like PtMo wavy nanowires as efficient catalysts for the methanol oxidation reaction

Highly-efficient steam reforming of methanol over copper modified molybdenum carbide

Catalytic Activity and Stability of Nickel-Modified Molybdenum Carbide Catalysts for Steam Reforming of Methanol

H 2 Production from Methane Reforming over Molybdenum Carbide Catalysts: From Surface Properties and Reaction Mechanism to Catalyst Development

Molybdenum Carbide/Ni Nanoparticles Embedded into Carbon Nanofibers as an Effective Non-Precious Catalyst for Green Hydrogen Production from Methanol Electrooxidation

H2 Production from Methane Reforming over Molybdenum Carbide Catalysts: from Surface Properties and Reaction Mechanism to Catalyst Development

Hydrogen production from formic acid over morphology-controllable molybdenum carbide catalysts

Decarbonizing Steam‐Methane Reforming: Enhancing Activity through Joule Heating of a Ni/ZrO2‐Coated FeCrAl Coil

A Nanoporous Molybdenum Carbide Nanowire As an Electrocatalyst for Hydrogen Evolution Reaction

Trireforming Of Methane To Syngas Over Supported Carbide Catalysts

Robust Mesh-type Structured CuFeMg/γ-Al2O3/Al Catalyst for Methanol Steam Reforming in Microreactors

Influence of Transition Metal on the Hydrogen Evolution Reaction over Nano-Molybdenum-Carbide Catalyst

Atomically Dispersed Ni/-MoC Catalyst for Hydrogen Production from Methanol/Water

Phase Engineering of Molybdenum Carbide/Oxide for Highly-Efficient Electrocatalytic Hydrogen Production

Atomically Dispersed Ni/α-MoC Catalyst for Hydrogen Production from Methanol/Water

Highly active and durable nanostructured molybdenum carbide electrocatalysts for hydrogen production

Steam Reforming of Methane over Nickel-Aluminum Spinel-Derived Catalyst

Hydrogen Production from Cylindrical Methanol Steam Reforming Microreactor with Porous Cu-Al Fiber Sintered Felt

Regulating N-Cu/MoxC Interfacial Effect Coupling Β-Mo2c/γ-moc Phase Engineering to Achieve Efficient Hydrolysis Dissociation and Methanol Dehydrogenation for Hydrogen Production