Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Optimization of shell-and-tube heat exchangers conforming to TEMA standards with designs motivated by constructal theory

Globally Optimal Design of Intensified Shell and Tube Heat Exchangers Using Complete Set Trimming

Efficient Strategy for the Synthesis of Work and Heat Exchange Networks

Globally Optimal Synthesis of Heat Exchanger Networks. Part III: Non-isothermal Mixing in Minimal and Non-Minimal Networks

Intelligent optimization design of shell and helically coiled tube heat exchanger based on genetic algorithm

Thermal-economic optimization design of shell and tube heat exchanger using an improved sparrow search algorithm

Configuration optimization of shell-and-tube heat exchangers with helical baffles using multi-objective genetic algorithm based on fluid-structure interaction

Optimization of the Design of Shell and Double Concentric Tube Heat Exchanger using the Jaya Algorithm

Multi-parameter Optimization of Shell-and-tube Heat Exchanger with Helical Baffles Based on Entransy Theory

Optimal heat exchanger network synthesis with the detailed heat transfer equipment design

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Design optimization of a high-temperature fin-and-tube heat exchanger manifold – A case study

Enhancing heat transfer efficiency in corrugated tube heat exchangers: A comprehensive approach through structural optimization and field synergy analysis

Optimal Thermal Design of Fin-and-Tube Heat Exchangers by Integration of a SUMT and a SCGM

A Novel Optimization Framework for Designing Multi-Stream Compact Heat Exchangers and Associated Network

Application Of A Genetic Algorithm For Thermal Design Of Fin-And-Tube Heat Exchangers

Heat exchanger network optimisation considering different shell-side flow arrangements

Optimization Design of Tube-Shell Heat Exchanger Based on Genetic Algorithm

Mathematical programming model for heat exchanger design through optimization of partial objectives

Optimal design analysis of a tubular heat exchanger network with extended surfaces using multi-objective constructal optimization

Structural Optimization of Shell-Tube Heat Exchanger with Helical Baffles Based on Fluid-Structure Interaction