Abstract:Spinel-structured lithium nickel manganese oxide (LiNi0.5M1.5O4, LNMO) is a low-cost battery cathode material with a high operating voltage (similar to 4.7 V vs Li+/Li), relatively high capacity (similar to 147 mA h g(-1)), and good rate performance. Previous studies have suggested that large particle size, single-crystal-like morphology, and high phase purity are favorable for achieving good electrochemical performance. However, simultaneous control over these properties is difficult for conventional solid-state synthesis at high temperatures. Here, we report a molten-salt-assisted method to prepare large-size (median grain size D-50 = 16.8 mu m) single-crystal LNMO with molten lithium molybdate (Li2MoO4) serving as the medium of ion diffusion and crystal growth. In situ X-ray diffraction (XRD) studies of the material preparation process reveal structural disorder and formation of the rock-salt impurity phase at high temperatures, which are reverted upon cooling. The correlations between the cooling rate and structural ordering/phase purity at the single-particle level are further studied using correlative scanning electron microscopy and Raman spectroscopy (SEM-Raman) techniques. SEM-Raman studies for the first time reveal that the Ni-rich rock-salt impurity phase actually exists at the interior of the large-size LNMO particles, which is difficult to be detected by conventional XRD or Raman spectroscopy because of limitations in probing depth. We further confirm that slow cooling is the key to increasing structural ordering and enhancing electrochemical performance of LNMO. The optimized LNMO sample shows excellent cycle performance by retaining similar to 85% initial capacity after 300 charge-discharge cycles and acceptable level of rate capability despite its large particle size. Our results highlight the importance of mechanistic studies into material synthesis, which provide the basis for designing better materials and more efficient preparation methods.

Performance Optimization of Li1+X(Ni0.15co0.15mn0.70)O2.275+X/2 by Post Molten Salt Treatment As Cathode Material for Li-Ion Batteries

Morphology and Electrochemical Performance of Li[Li0.2mn0.54ni0.13co0.13]O-2 Cathode Materials Treated in Molten Salts

Molten Salt Synthesis and High-Performance of Nanocrystalline Li-rich Cathode Materials

General synthesis of xLi2MnO3·(1 - X)LiMn 1/3Ni1/3Co1/3O2 nanomaterials by a molten-salt method: Towards a high capacity and high power cathode for rechargeable lithium batteries

Enhanced electrochemical performance of Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 cathode material coated with Li + -conductive Li 2 SiO 3 for lithium ion batteries

A cation/anion co-doped Li1.12Na0.08Ni0.2Mn0.6O1.95F0.05 cathode for lithium ion batteries

Enhanced Electrochemical Performance in Lithium Ion Batteries of a Hollow Spherical Lithium-Rich Cathode Material Synthesized by a Molten Salt Method

High-rate and Long-Life Li1.18Mn0.56Ni0.13Co0.13O2 Cathodes of Li-ion Batteries

Synthesis and Structure Stabilization of Disordered Rock Salt Mn/V-Based Oxyfluorides As Cathode Materials for Li-Ion Batteries

Molten Salt‐Assisted Synthesis of Single‐Crystalline Nonstoichiometric Li1+xNi1–xO2 with Improved Structural Stability

Surface-Modification of Doping and Coating Li1.2Ni0.2Co0.08Mn0.52O2 as a Long Life Cathode Material of Lithium-Ion Battery by Sodium Salt Treatment

Study on the Effect of the Pre-treatment Temperature on Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Material

Surface Reconstruction Enhanced Li‐Rich Cathode Materials for Durable Lithium‐Ion Batteries

Excellent cycling performance of high-nickel single-crystal cathode material by a well-tailored binary molten-salt method

Predominant growth orientation of Li1.2(Mn0.4Co0.4)O2 cathode materials produced by the NaOH compound molten salt method and their enhanced electrochemical performance

Enhance performances of Co-free Li-rich cathode by eutesctic melting salt treatment

A simple one-step molten salt method for synthesis of micron-sized single primary particle LiNi0.8Co0.1Mn0.1O2 cathode material for lithium-ion batteries

The Enhanced Electrochemical Performance of Nanocrystalline Li[Li 0.26 Ni 0.11 Mn 0.63 ]O 2 Synthesized by the Molten-Salt Method for Li-ion batteries

Controlling Particle Size and Phase Purity of "Single-Crystal" LiNi0.5Mn1.5O4 in Molten-Salt-Assisted Synthesis

Improved Electrochemical Behavior and Thermal Stability of Li and Mn-Rich Cathode Materials Modified by Lithium Sulfate Surface Treatment

Rock Salt-Type LiTiO 2 @LiNi 0.5 Co 0.2 Mn 0.3 O 2 as Cathode Materialswith High Capacity Retention Rate and Stable Structure