Abstract:Micrometer-sized single crystal cathodes have garnered significant interest as promising cathode materials for lithium-ion batteries due to their ability to reduce surface area exposure to electrolytes and suppress side reactions, thereby enhancing electrochemical performance. One of the challenging issues with single crystal cathode materials is synthesizing monodisperse and discrete single crystals rather than agglomerated quasi-single crystals. However, conventional solid-state synthesis of most single crystals results in severe agglomeration and cation mixing, as it requires high temperatures to promote particle growth to several micrometers. In this study, a novel morphology-conserving reaction strategy that employs octahedron single crystal intermediates is introduced to synthesize discrete, monodisperse LiNi0.97Co0.02Mn0.01O2 octahedron single crystals. This scalable and cost-effective approach involves using rock-salt Ni0.97Co0.02Mn0.01O1+x octahedrons as single crystal intermediates, which are transformed in unreactive unary lithium salt melts (LiCl and Li2SO4) from spherical Ni0.97Co0.02Mn0.01(OH)2 obtained via coprecipitation. These intermediates are then subjected to a stoichiometric amount of Li precursor in a conventional solid-state synthesis to produce layered LiNi0.97Co0.02Mn0.01O2. This process is a morphology-conserving lithiation reaction, leading to the formation of discrete and monodisperse LiNi0.97Co0.02Mn0.01O2 octahedron single crystals. The resultant LiNi0.97Co0.02Mn0.01O2 single crystals demonstrate superior electrochemical performance, including stable capacity retention over 150 cycles, which surpasses that of typical quasi-single crystals produced through conventional methods. This is attributed to negligible crack formation during cycling, in contrast to significant cracking observed in conventional quasi-single crystals. This implies that single-crystal forms are preferred over agglomerated quasi-single crystal forms for enhancing cycle performance. These findings provide valuable insights into the industrial synthesis of discrete and monodisperse ultrahigh-nickel oxide cathode materials.

Molten Salt‐Assisted Synthesis of Single‐Crystalline Nonstoichiometric Li1+xNi1–xO2 with Improved Structural Stability

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

A Molten-Salt Method to Synthesize Ultrahigh-Nickel Single-Crystalline LiNi0.92 Co0.06 Mn0.02 O2 with Superior Electrochemical Performance as Cathode Material for Lithium-Ion Batteries.

Controlling Particle Size and Phase Purity of "Single-Crystal" LiNi0.5Mn1.5O4 in Molten-Salt-Assisted Synthesis

The Enhanced Electrochemical Performance of Nanocrystalline Li[Li 0.26 Ni 0.11 Mn 0.63 ]O 2 Synthesized by the Molten-Salt Method for Li-ion batteries

Gradient-porous-structured Ni-rich Layered Oxide Cathodes with High Specific Energy and Cycle Stability for Lithium-Ion Batteries

Excellent cycling performance of high-nickel single-crystal cathode material by a well-tailored binary molten-salt method

Electrochemical performances of nickel‐rich single‐crystal LiNi0.83Co0.12Mn0.05O2 cathode material synthesized by tuning Li+/Ni2+ mixing

A simple one-step molten salt method for synthesis of micron-sized single primary particle LiNi0.8Co0.1Mn0.1O2 cathode material for lithium-ion batteries

Synthesis of Monodisperse and Discrete Ultra-High Nickel LiNi0.97Co0.02Mn0.01O2 Octahedral Single Crystals via Single Crystal Intermediates for Li-Ion Batteries

One‐Step Molten‐Salt‐Assisted Approach for Direct Preparation and Regeneration of LiNi0.6Co0.2Mn0.2O2 Cathode

Enhanced Li-ion Intercalation Kinetics and Lattice Oxygen Stability in Single-Crystalline Ni-rich Co-poor Layered Cathodes

Synthesis of high-performance single-crystal Li-rich cathode by self-combustion method

A facile eutectic mixed molten salt method for synthesizing LiNi0.5Co0.2Mn0.3O2 cathode material for lithium-ion batteries

Performance Optimization of Li1+X(Ni0.15co0.15mn0.70)O2.275+X/2 by Post Molten Salt Treatment As Cathode Material for Li-Ion Batteries

One-Step Synthesis of Stoichiometric LiNi 0.80 Co 0.15 Al 0.05 O 2 Precursor in Acidic Environment and Its Facile Growth into Single Crystals at Low Temperatures for Li-Ion Batteries

Improving the stability of P2-type NaMn2/3Ni1/3O2 via phasic intergrowth induced by Li-ion substitution

Molten Salt Synthesis and High-Performance of Nanocrystalline Li-rich Cathode Materials

One-Step Synthesis of a Single-Crystal LiNi 0.83 Co 0.11 Mn 0.06 O 2 Cathode with Excellent Electrochemical Properties by Ti 4+ Doping and LiTi 2 O 4 In Situ Chemical Coating Using a Novel Variable Temperature Sintering Process

Double‐Salts Super Concentrated Carbonate Electrolyte Boosting Electrochemical Performance of Ni‐Rich LiNi0.90Co0.05Mn0.05O2 Lithium Metal Batteries

In-situ construction of a thermodynamically stabilized interface on the surface of single crystalline Ni-rich cathode materials via a one-step molten-salt route