Abstract:Single-crystalline LiNi0.6Co0.2Mn0.2O2 cathodes have received great attention due to their high discharge capacity and better electrochemical performance. However, the single-crystal materials are suffering from severe lattice distortion and electrode/electrolyte interface side reactions when cycling at high voltage. Herein, a unique single-crystal LiNi0.6Co0.2Mn0.2O2 with Al and Zr doping in the bulk and a self-formed coating layer of Li2ZrO3 in the surface has been constructed by a facile strategy. The optimized cathode material exhibits excellent structural stability and cycling performance at room/elevated temperatures after long-term cycling. Specifically, even after 100 cycles (1C, 3.0–4.4 V) at 50 °C, the capacity retention for the Al and Zr co-doped sample reaches 92.1%, which is much higher than those of the single Al-doped (85.4%), single Zr-doped (87.1%), and bare samples (76.3%). The characterization results and first-principles calculations reveal that the excellent electrochemical properties are attributed to the stable structure and interface, in which the Al and Zr co-doping hinders cation mixing and suppresses detrimental phase transformations to reduce internal stress and mitigate microcracks, and the coating layer of Li2ZrO3 can protect the surface and suppress interfacial parasitic reactions. Overall, this work provides important insights into how to simultaneously build a stable bulk structure and interface for the single-crystal NCM cathode via a facile preparation process.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c10799.XRD pattern, Rietveld refinement data and SEM images for Al-NCM and Zr-NCM; XPS spectrum for NCM and AZ-NCM; DFT calculation models; binding energy of different calculation structures; charge–discharge profiles and dQ dV–1 profiles of NCM and AZ-NCM; and resistance values for the NCM and AZ-NCM electrodes (PDF)This article has not yet been cited by other publications.

Electrochemical performances of nickel‐rich single‐crystal LiNi0.83Co0.12Mn0.05O2 cathode material synthesized by tuning Li+/Ni2+ mixing

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

One-Step Synthesis of a Single-Crystal LiNi 0.83 Co 0.11 Mn 0.06 O 2 Cathode with Excellent Electrochemical Properties by Ti 4+ Doping and LiTi 2 O 4 In Situ Chemical Coating Using a Novel Variable Temperature Sintering Process

A Comparative Investigation of Single Crystal and Polycrystalline Ni‐Rich NCMs as Cathodes for Lithium‐Ion Batteries

Synthesis of Single Crystal LiNi 0.92 Co 0.06 Mn 0.01 Al 0.01 O 2 Cathode Materials with Superior Electrochemical Performance for Lithium Ion Batteries

Low-temperature strategy to synthesize single-crystal LiNi0.8Co0.1Mn0.1O2 with enhanced cycling performances as cathode material for lithium-ion batteries

Synthesis of high-performance single-crystal LiNi0.8Co0.1Mn0.1O2 cathode materials by controlling solution super-saturation

Dual-Element-Modified Single-Crystal LiNi0.6Co0.2Mn0.2O2 As a Highly Stable Cathode for Lithium-Ion Batteries.

Synthesis of high-performance single-crystal Li-rich cathode by self-combustion method

Grain size regulation for balancing cycle performance and rate capability of LiNi0.9Co0.055Mn0.045O2 single crystal nickel-rich cathode materials

Excellent cycling performance of high-nickel single-crystal cathode material by a well-tailored binary molten-salt method

CH3COOLi-assisted lithium source on the synthesis of high-performance single-crystal Ni-rich cathode material

Dual-Element-Modified Single-Crystal LiNi 0.6 Co 0.2 Mn 0.2 O 2 as a Highly Stable Cathode for Lithium-Ion Batteries

Chemical-Mechanical Effects in Ni-Rich Cathode Materials

Highly‐Dispersed Single‐Crystalline Ni‐Rich Cathodes with Low Li/O Loss for High‐Power and Long‐Life Li‐Ion Batteries

Enhanced structure and electrochemical stability of single crystal nickel-rich cathode material by La2Li0.5Co0.5O4 surface coating

Unique insights into the design of low-strain single-crystalline Ni-rich cathodes with superior cycling stability

Highly‐Dispersed Submicrometer Single‐Crystal Nickel‐Rich Layered Cathode: Spray Synthesis and Accelerated Lithium‐Ion Transport

Highly Dispersed Micrometer Nickel-Rich Single-Crystal Construction: Benefits of Supercritical Reconstruction during Hydrothermal Synthesis

In Situsynthesis Of A Nickel Concentration Gradient Structure Of Ni-Rich Lini(0.8)Co(0.15)Al(0.05)O(2)With Promising Superior Electrochemical Properties At High Cut-Off Voltage