Abstract:Single-crystalline LiNi0.6Co0.2Mn0.2O2 cathodes have received great attention due to their high discharge capacity and better electrochemical performance. However, the single-crystal materials are suffering from severe lattice distortion and electrode/electrolyte interface side reactions when cycling at high voltage. Herein, a unique single-crystal LiNi0.6Co0.2Mn0.2O2 with Al and Zr doping in the bulk and a self-formed coating layer of Li2ZrO3 in the surface has been constructed by a facile strategy. The optimized cathode material exhibits excellent structural stability and cycling performance at room/elevated temperatures after long-term cycling. Specifically, even after 100 cycles (1C, 3.0–4.4 V) at 50 °C, the capacity retention for the Al and Zr co-doped sample reaches 92.1%, which is much higher than those of the single Al-doped (85.4%), single Zr-doped (87.1%), and bare samples (76.3%). The characterization results and first-principles calculations reveal that the excellent electrochemical properties are attributed to the stable structure and interface, in which the Al and Zr co-doping hinders cation mixing and suppresses detrimental phase transformations to reduce internal stress and mitigate microcracks, and the coating layer of Li2ZrO3 can protect the surface and suppress interfacial parasitic reactions. Overall, this work provides important insights into how to simultaneously build a stable bulk structure and interface for the single-crystal NCM cathode via a facile preparation process.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c10799.XRD pattern, Rietveld refinement data and SEM images for Al-NCM and Zr-NCM; XPS spectrum for NCM and AZ-NCM; DFT calculation models; binding energy of different calculation structures; charge–discharge profiles and dQ dV–1 profiles of NCM and AZ-NCM; and resistance values for the NCM and AZ-NCM electrodes (PDF)This article has not yet been cited by other publications.

Excellent cycling performance of high-nickel single-crystal cathode material by a well-tailored binary molten-salt method

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Well-dispersed single-crystalline nickel-rich cathode for long-life high-voltage all-solid-state batteries

Single-Crystalline Ni-Rich layered cathodes with Super-Stable cycling

A Molten-Salt Method to Synthesize Ultrahigh-Nickel Single-Crystalline LiNi0.92 Co0.06 Mn0.02 O2 with Superior Electrochemical Performance as Cathode Material for Lithium-Ion Batteries.

Ton-scale preparation of single-crystal Ni-rich ternary cathode materials for high-performance lithium ion batteries

Enhanced Structure/Interfacial Properties of Single‐Crystal Ni‐Rich LiNi0.92Co0.04Mn0.04O2 Cathodes Synthesized Via LiCl‐NaCl Molten‐Salt Method

Electrochemical performances of nickel‐rich single‐crystal LiNi0.83Co0.12Mn0.05O2 cathode material synthesized by tuning Li+/Ni2+ mixing

A short process and low-cost preparation of single crystal LiNi0.6Co0.2Mn0.2O2 cathode for lithium-ion batteries

Dual-Element-Modified Single-Crystal LiNi0.6Co0.2Mn0.2O2 As a Highly Stable Cathode for Lithium-Ion Batteries.

Highly‐Dispersed Submicrometer Single‐Crystal Nickel‐Rich Layered Cathode: Spray Synthesis and Accelerated Lithium‐Ion Transport

Single-crystal nickel-rich layered-oxide battery cathode materials: synthesis, electrochemistry, and intra-granular fracture

Synthesis of Single Crystal LiNi 0.92 Co 0.06 Mn 0.01 Al 0.01 O 2 Cathode Materials with Superior Electrochemical Performance for Lithium Ion Batteries

Synthesis of high-performance single-crystal LiNi0.8Co0.1Mn0.1O2 cathode materials by controlling solution super-saturation

Surface Atomic Rearrangement with High Cation Ordering for Ultra-Stable Single-Crystal Ni-Rich Co-Less Cathode Materials

Mechanistic Origin for High Structural Stability of Single Crystalline Nickel‐Rich Cathode Materials Via Al and Sm Co‐Doping

In-situ construction of a thermodynamically stabilized interface on the surface of single crystalline Ni-rich cathode materials via a one-step molten-salt route

Synthesis of high-performance single-crystal Li-rich cathode by self-combustion method

Dual-Element-Modified Single-Crystal LiNi 0.6 Co 0.2 Mn 0.2 O 2 as a Highly Stable Cathode for Lithium-Ion Batteries

Unique insights into the design of low-strain single-crystalline Ni-rich cathodes with superior cycling stability